User manual MITSUBISHI WS-65517

[. . . ] Projec t ion Televis ion Television Owner's Guide WS - 5 5 517, WS - 6 5 517, WS -73 517 TM TM TV Information: Use this space to record the model and serial numbers of your television. This information is on the back of your TV. Model number Serial number visit our website at w w w. m i t s u b i s h i -t v. c o m CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] ChannelView screen, future programs ChannelView Figures6 and 7 Press GUIDE while viewing Ant-1 or Ant-2 to display a list of available memorized digital channels and memorized analog channel information (if available from the broadcaster). ChannelView for digital channels will show the major and sub-channels (or bitstreams). The currently viewed channel will be highlighted in the list. Analog channel information will display as sent. Press ADJUST or to page through the all the channels in memory, one by one. To page through the choices quickly, press CH or . The information on this screen is sent by the broadcaster. If limited data is shown or no program data appears, it is because of limitations from the broadcaster. See Troubleshooting for possible solutions. or To record a future program, press ADJUST to select the channel you want to record from. Press INFO to see the upcoming programs for that channel. Press ADJUST or to move to your program choice. Press REC (record) when your choice is highlighted in ChannelView. A red "R" will be added before the program time. The message, "The recording has been added to the Record List" will display. To view, change or cancel the recording, use the Record List (page 51). The program you selected will be on that list. Device Selection Menu For compatible traditional VCRs, pressing GUIDE when the VCR is highlighted on the Device Selection menu will change the VCR's input. When the A/V Receiver icon is highlighted in the Audio Section, pressing GUIDE switches the A/V Receiver from analog audio to digital audio and vice versa. Record To Menu When in the Record To menu, pressing GUIDE will display the current programmed recordings. Please see Record List, page 51 for more infomation. IMPORTANT For ChannelView information to be refreshed daily, the TV must be powered Off between 5 to 15 minutes a day, depending on the number of channels in memory (not all channels supply data). If the TV loses power, the program listings will be temporarily lost. Figure 6. ChannelView screen, current programs 49 NetCommand® Controlled Recordings Record To Setup Figure 8 Recording Now Can be used when viewing Antenna 1 or 2, an IEEE 1394 device, or a non-recording traditional device. Press DEVICE on the remote control to move to the Source Device section. Press ADJUST or to select the source device you will record from. [. . . ] BECAUSE SOME JURISDITIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF IMPLIED WARRANTIES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU. MDEA SHALL NOT, UNDER ANY CIRCUMSTANCES BE LIABLE TO YOU OR ANY THIRD PARTIES FOR ANY DAMAGES OF ANY NATURE, WHETHER INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOST PROFITS, LOSS OF GOOD WILL OR EXPENDITURES MADE OR COMMITTED FOR IN RELIANCE ON THE CONTINUATION OF THIS LICENSE. YOU AGREE THAT NEITHER MDEA'S BREACH OF THIS LICENSE NOR ITS FAILURE TO REPAIR A DEFECT, ERROR OR BUG SHALL CONSTITUTE A FAILURE OF THE ESSENTIAL PURPOSE OF THIS LICENSE. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTIAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. [. . . ]