User manual MITSUBISHI XD221U

[. . . ] EN DATA PROJECTOR MODEL XD221U User Manual This User Manual is important to you. Please read it before using your projector. ENGLISH CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. NOTE: SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. WARNING Use the attached specified power supply cord. If you use another power supply cord, it may cause interference with radio and television reception. [. . . ] Use this setting to activate or deactivate the password lock. Use this setting to change the position of the menu on the screen. Select Auto to automatically activate the film mode when the input video signal is a video signal from a film. Select Auto to automatically set the appropriate video format in relative to the input signal. If projected images aren't displayed correctly, select a desired video format manually. Select the appropriate format when the input signal is a WXGA video signal and the "AUTO" mode does not display images properly. Select "OFF" when the input signal is other than a WXGA video signal. Select this setting to automatically change the SETUP mode. Select this setting to increase the density of black. Select this setting to lower the density of black. · When 7. 5% is set, the brightness is decreased by the setup cancel function for the U. S. Selects a desired language for the menu. Resets all menu settings except for PASSWORD FUNCTION and LANGUAGE to the default. opt. FEATURE ASPECT PASSWORD FUNCTION MENU POSITION CINEMA MODE ?AUTO AUTO AUTO AUTO English OK 16:9 FULL PASSWORD FUCNTION MENU POSITION CINEMA MODE VIDEO SIGNAL WXGA SETUP 2 options AUTO/OFF Aè LANGUAGE RESET ALL VIDEO SIGNAL 8 options WXGA OFF/AUTO/1280 x 768/ 1280 x 768RB/ 1360 x 768/ 1366 x 768 AUTO OFF SETUP 3. 75%/7. 5% LANGUAGE RESET ALL 12 languages OK · You can select CINEMA MODE only when the input signal is a TV60, TV50, 480i, or 576i video signal. EN-21 ENGLISH Menu operation (continued) 4. TRACKING Setting 0-999 0-999 0-31 0-2800 AUTO RGB COMPUTER INPUT YCBCR/YPBPR OVER SCAN HOLD USER CLAMP POSITION CLAMP WIDTH VERT. SYNC LPF SHUTTER(U) SHUTTER(L) SHUTTER(LS) SHUTTER(RS) 100%-90% OFF / ON OK 1-255 1-63 AUTO / OFF ON / OFF 0-20 0-20 0-20 0-20 Use this setting to correct solid white or solid black that appears in projected images. Use this setting to correct solid black that appears in projected images. Use this setting to adjust projected images when the motion is not smooth. Select this setting to enable or disable LPF. Use this setting to adjust projected images when noise appears in the top part of the image. Use this setting to adjust projected images when noise appears in the bottom part of the image. Use this setting to adjust projected images when noise appears in the left half of the image. Use this setting to adjust projected images when noise appears in the right half of the image. ? Feature description Select this setting to adjust the horizontal position of projected images. [. . . ] The projector's maximum resolution is 1024 x 768 pixels. It may not display images of higher resolutions than 1024 x 768 correctly. Images with SYNC on G (Green) signal may jitter. Images with SYNC on G (Green) signal may be tinged with green. [. . . ]