User manual MITSUBISHI XD80U

[. . . ] DATA PROJECTOR MODEL XD80U User Manual IMPORTANT * * * * * DLPTM (Digital Light Processing) and DLPTM chip are registered trademarks of Texas Instru-ments Incorporated (U. S. A. ). VGA and XGA are trademarks or registered trademarks of International Business Machines Corporation (U. S. A. ). S-VGA is a registered trademark of Video Electronics Standards Association. Microsoft, Windows, and PowerPoint are registered trademarks of Microsoft Corporation (U. S. A. [. . . ] (This feature is used to project a squeezed image in a proper aspect ratio. ) Zoom . . . . . . . . . . Projects only the 4:3 portion within 16:9 image to fill the screen. (Portion that extend off screen is cut. ) Aspect ratio selection Auto Wide Zoom 4:3 screen 16:9 screen Note: When selection has been made for the "Real" setting of the personal computer signal (i. e. , when the input signal and the projector display resolution are high) and the "Zoom" setting of the video signal, pressing the SELECT ( ) buttons on the remote control will permit movement of the display position. Note that there will not be any movement when the menu or the quick menu is displayed. E-25 General Operation Freezing a Moving Picture This function is used to stop and view a moving picture. Note that the input image continues to advance even though the picture there is a still picture condition. A press of the FREEZE button changes the screen to a still picture. A further press returns the screen to a moving picture. FREEZE MUTE LAMP MODE AUTO 1 2 3 4 ASPECT VOL KSTN ZOOM TIMER Cancelling Video and Audio Temporarily This function is used to cancel the video and audio at the same time. A press of the MUTE button will blank the picture and the sound, and the screen will take on the background color that has been set. Another press will cause a return to the original conditions. FREEZE MUTE LAMP MODE AUTO 1 2 3 4 ASPECT VOL KSTN ZOOM TIMER Lamp Mode Use this if the picture is projected on a small screen and the picture is too bright or when projecting images in dark rooms. Pressing the LAMP MODE button will set the lamp mode. STATUS STANDBY STATUS indicator Low (STATUS indicator is lit green) The lamp's brightness is reduced to approximately 80%, extending the lamp's service life. MENU Normal (STATUS indicator is off) The lamp brightness is set to 100% and the screen is bright. DUAL COLOR MODE Note: Frequent switching this mode can degrade the lamp. FREEZE MUTE LAMP MODE AUTO 1 2 3 4 ASPECT VOL KSTN ZOOM TIMER Selection of the Color Mode (DCM) Select the preset color mode. STATUS STANDBY Pressing the DUAL COLOR MODE button of the projector switches the color mode. Each time the DUAL COLOR MODE button is pressed, the screen will be black for approximately 3 seconds and then a message indicating the switched color mode will be displayed for approximately 1. 5 seconds. Select this to prioritize color. MENU DUAL COLOR MODE DUAL COLOR MODE button E-26 General Operation Keystone Manual Adjustment Use this to adjust for trapezoidal (keystone) distortion of the projected image. The projector has both an automatic and a manual keystone adjustment function. The manual adjustment will be described here. Adjustment Method (1) Press the ( ) buttons of the projector, or the ( ) KSTN buttons of the remote control and set the left and right sides so that they are parallel. The keystone adjustment display appears when one of the buttons is pressed. (1) SOURCE AUTO (Projector button) STANDBY MENU RGB ENTER VIDEO CANCEL QUICK Q (2) FREEZE MUTE LAMP MODE AUTO Press the button. Press the button. 1 2 3 4 ASPECT VOL KSTN ZOOM TIMER (1) The dotted lines indicate the proper condition (2) To exit the display immediately, press the CANCEL button of the remote control. The display will close when there has not been an operation in about 10 seconds. Note: * Screen examples have been drawn in an exaggerated style for the purpose of description. * Please note that depending on the projected picture and the projection conditions, it may not be possible to eliminate keystone distortion completely. * When the Auto Keystone function is OFF, the keystone adjustment settings will be maintained even when the power has been turned off. * See "Adjustment of the Projection Screen" on Page E-22 for information about the Auto Keystone function. See "Auto Keystone" on Page E-46 for information about turning Auto Keystone ON and OFF. Also see "Keystone" on Page E-46 for information about making manual adjustments using the on-screen menu. Adjustment of the Volume This function adjusts the volume of the built-in speaker. STANDBY MENU (1) Press the or VOL button to adjust the volume. [. . . ] When this happens, an explosive sound can be heard and pieces of glass may be scattered in the lamp cartridge. Do not touch them as the pieces of glass may cause injury. If this happens, contact your dealer or the store the projector was purchased. · This projector uses a lamp that contains mercury. [. . . ]