User manual MK ELECTRIC ALBANYPLUS DATA SHEET

[. . . ] It is important to ensure that the correct control circuit, active or passive, is selected for each application, see page 260 for definitions. Only suitable for supply voltage of 240V a. c. , 50Hz. DIMENSIONS: 86 x 146mm FIXING CENTRES: 120. 6mm BS. 7288: 1990 K2883 MCO K2883 SAB K2883 BSS 1 GANG DP 15 AMP SHUTTERED 5 5 5 K733 MCO K733 SAB K733 BSS 2 GANG WITH DUAL EARTH TERMINALS High Integrity Earthing K733 is provided with dual earth terminals for use when installations are to comply with Section 607 of BS. 7671, IEE Wiring Regulations MOUNTING BOXES FLUSH 25mm 1 GANG: 861 ZIC 2 GANG: 862 ZIC FLUSH 35mm (for extra wiring space) 1 GANG: 866 ZIC 2 GANG: 886 ZIC SURFACE WITH KNOCKOUTS: 1 GANG: K899 ALM 2 GANG: K897 ALM WITHOUT KNOCKOUTS: 1 GANG: K829 ALM 2 GANG: K830 ALM DIMENSIONS: 1 GANG: 86 x 86mm 2 GANG: 86 x 146mm FIXING CENTRES: 1 GANG: 60. 3mm 2 GANG: 120. 6mm BS. 1363: Pt 2: 1995 MOUNTING BOXES FLUSH 25mm: 861 ZIC FLUSH 35mm: (for extra wiring space) 866 ZIC SURFACE WITH KNOCKOUTS: K899 ALM WITHOUT KNOCKOUTS: K829 ALM DIMENSIONS: 86 x 86mm FIXING CENTRES: 60. 3mm BS. 546: 1950 122 Albany Plus | decorative (NON UK) www. mkelectric. co. uk wiring devices Socket Outlets Non Standard Socket Outlets Floor Mounted Socket Outlets 15 AMP 127V FLUSH 16 AMP MODULAR FORMAT FLUSH 13 AMP FLUSH 13 AMP K2261 MCO K182 MCO / K5381 WHI K1239 MCO K2261 SAB K182 SAB / K5381 WHI K1239 SAB 740 MCO 742 MCO K2262 BSS K3431 BSS / K4901 WHI K1239 BSS 741 SAB 749 BSS K2261 MCO K2261 SAB K2261 BSS K2262 MCO K2262 SAB K2262 BSS 1 1 1 1 1 1 K182 MCO / SAB / BSS with K5831 WHI 1 10 1 GANG SHUTTERED 1 GANG 16 AMP 250V SHUTTERED GERMAN TYPE (2P+E) SOCKET K1239 MCO K1239 SAB K1239 BSS 2 GANG WITH CLEAN EARTH FACILITY 5 5 5 740 MCO 740 SAB 740 BSS 10 10 10 2 GANG SHUTTERED 1 K184 MCO / SAB / BSS 10 with 2 x K5831 2 GANG 16 AMP 250V SHUTTERED GERMAN TYPE (2P+E) SOCKETS 10 K3431 MCO / SAB / BSS with K4901 WHI & K3701 10 1 GANG 16 AMP 125/250V SHUTTERED UNIVERSAL TYPE SOCKET MOUNTING BOXES: FLUSH 35mm (2P+E SOCKETS) 1 GANG: 866 ZIC 2 GANG: 886 ZIC* SURFACE WITH KNOCKOUTS: 1 GANG: K899 ALM 2 GANG: K897 ALM* WITHOUT KNOCKOUTS: 1 GANG: K829 ALM 2 GANG: K830 ALM* DIMENSIONS: 1 GANG: 86 x 86mm 2 GANG: 86 x 146mm* The universal socket does not incorporate an earth contact. [. . . ] DP SWITCHED WITH TAMPERPROOF FUSE CARRIER SCREW K961D6 MCO K961D6 BSS DP SWITCHED WITH NEON AND RED ROCKER 1 1 1 DP SWITCHED WITH FLEX OUTLET, NEON AND TAMPERPROOF FUSE CARRIER SCREW K971 MCO K971 SAB K971 BSS DP SWITCHED WITH FLEX OUTLET AND NEON 5 5 5 K973KO MCO K973KO BSS DP WITH SECRET KEY OPERATED SWITCH, NEON AND TAMPERPROOF FUSE CARRIER SCREW 1 1 MOUNTING BOXES FLUSH: 866 ZIC SURFACE (MCO): WITH KNOCKOUTS: K899 ALM WITHOUT KNOCKOUTS: K829 ALM All connection units are fitted with a 13amp fuse (to BS1362) TERMINAL CAPACITY: 2 x 6mm2 stranded (max) DIMENSIONS: 86 x 86mm FIXING CENTRES: 60. 3mm BS. 1363 Pt 4: 1995 Albany Plus technical hotline +44 (0)1268 563720 decorative 125 | wiring devices 3 Pole Fan Isolator Triple Pole & Neutral Switch Shaver Supply Units Flex Outlets (NON UK) Plateswitches 10 AMP 32 AMP FLUSH FLUSH FLUSH 10 AMP FLUSH WIDE ROCKER FLUSH 10 AMP FLUSH K2240 MCO K4671 MCO K4761 MCO K4860 MCO K5114 MCO K703 MCO K2240 SAB K4672 SAB K4761 SAB K4860 SAB K2240 BSS K5114 BSS K707 SAB K4673 BSS K4762 BSS K4860 SAB K4858 K5114 MCO K5114 BSS WITH NEON 1 1 K703 MCO K703 SAB K703 BSS DUAL VOLTAGE 115/230V OUTPUT (220/240V 50HZ INPUT) 1 1 1 K2240 MCO K2240 SAB K2240 BSS FLEX OUTLET 1 1 1 K4671 MCO K4671 SAB K4671 BSS 1 GANG SP TWO-WAY 5 5 5 5 5 5 5 5 5 K4761 MCO K4761 SAB K4761 BSS 1 GANG SP TWO-WAY WIDE ROCKER 5 5 5 K4860 MCO K4860 SAB K4860 BSS WITHOUT SWITCHLOCK 1 1 1 K707 MCO K707 SAB 1 1 K4672 MCO K4672 SAB K4672 BSS 2 GANG SP TWO-WAY DUAL VOLTAGE 115/230V OUTPUT (120/130V 50HZ/60HZ INPUT) (NON UK) MOUNTING BOX FLUSH: 878 ZIC This product is rated at 440 volts with a motor load rating of up to 12kW - 16 HP at 415V 3 phase. It has a utilisation category of AC22A­ switching of mixed resistive and inductive loads including moderate overloads for a continuous duty of 32 amps. DIMENSIONS: 146 x 86mm BS EN 60947-3: 1992 MOUNTING BOXES FLUSH: 878 ZIC This design incorporates a double wound isolating transformer rated 20VA at 230 or 115 volts and meets BS EN 61558-2-5: 1998 making it safe for use in bathrooms. Insertion of a shaver plug automatically switches on by energising the primary side of the isolating transformer ­ removal automatically switches off. The transformer is protected against overload by an automatic solid state overload device with automatic resetting. DIMENSIONS: 146 x 86mm FIXING CENTRES: 120. 6mm. BS EN 61558-2-5: 1998 MOUNTING BOXES FLUSH: 866 ZIC SURFACE (MCO) WITH KNOCKOUTS: K899 ALM WITHOUT KNOCKOUTS: K829 ALM Cable diameter: Minimum 4mm Maximum 14. 5mm DIMENSIONS: 1 gang: 86 x 86mm FIXING CENTRES: 1 gang: 60. 3mm K4762 MCO K4762 SAB K4762 BSS 2 GANG SP TWO-WAY WIDE ROCKERS 5 5 5 K4858 SWITCHLOCK FOR FAN ISOLATOR 10 K4673 MCO K4673 SAB K4673 BSS 3 GANG SP TWO-WAY MOUNTING BOXES FLUSH: 3995 ZIC MOUNTING BOXES FLUSH: 3995 ZIC SURFACE: K2160 WHI For local isolation of fans with or without timers for repair or routine maintenance. DIMENSIONS: 86 x 86mm FIXING CENTRES: 60. 3mm BS EN. 60947-3: 1992 SURFACE (MCO) : WITH KNOCKOUTS: K899 ALM WITHOUT KNOCKOUTS: K829 ALM These switches do not have to be derated when used with fluorescent or inductive loads. Switches can be wired as either one-way or two-way. DIMENSIONS: 86 x 86mm FIXING CENTRES: 60. 3mm BS EN 60669-1:2000 If an intermediate switch is required, a modular (Grid Plus) version is available. Order K3431 MCO/SAB grid plate, K3701 grid frame and K4893 WHI 20A intermediate switch. 126 Albany Plus | decorative Intelligent Dimmer Switches 230V a. c. 50Hz TUNGSTEN FILAMENT AND LOW VOLTAGE FLUSH wiring devices www. mkelectric. co. uk Standard Dimmer Switches 230V a. c. 50Hz TUNGSTEN FILAMENT FLUSH Dimmer Switches (NON UK) 200-240V a. c. 50Hz or 60Hz FLUSH K1534 MCO K1552 MCO K1536 MCO LV K1536 MCO LV K1531 MCO K1551 SAB K1552 SAB K1536 SAB LV K1536 SAB LV K1541 SAB K1532 BSS K1533 BSS K1551BSS LV K1551 BSS LV K1641 BSS K1534 MCO K1534 SAB K1534 BSS K1551 MCO K1551 SAB K1551 BSS K1532 MCO K1532 SAB K1532 BSS 1 1 1 1 GANG TWO WAY SINGLE 40W min, 250W max K1552 MCO K1552 SAB K1552 BSS K1533 MCO K1533 SAB K1533 BSS 1 1 1 2 GANG TWO WAY DOUBLE 60W min, 450W max for each dimmer K1536 MCO LV K1536 SAB LV K1536 BSS LV K1551 MCO LV K1551 SAB LV K1551 BSS LV 1 1 1 1 GANG TWO WAY SINGLE 40W/VA min, 300W/240VA max K1532 MCO LV K1532 SAB LV K1532 BSS LV 1 1 1 K1531 MCO K1531 SAB K1541 MCO K1541 SAB K1541 BSS K1631 MCO K1631 SAB K1641 MCO K1641 SAB K1641 BSS 1 1 1 1 1 1 1 1 1 1 1 1 GANG TWO WAY DOUBLE 40W/VA min, 300W/240VA max for each dimmer 1 GANG ONE WAY 40­250W 50Hz 1 GANG TWO WAY SINGLE 60W min, 500W max 2 GANG TWO WAY TRIPLE 40W min, 250W max for each dimmer 1 GANG TWO WAY SINGLE 60W/VA min, 500W/400VA max K1552 MCO LV K1552 SAB LV K1552 BSS LV 1 1 1 1 1 1 1 GANG SINGLE ONE WAY 75­500W 50Hz 1 1 1 2 GANG TWO WAY DOUBLE 60W/VA min, 450W/360VA max for each dimmer 1 1 1 GANG SINGLE ONE WAY 40­250W 60Hz 1 GANG TWO WAY DOUBLE 40W, 250W max for each dimmer Conforming to the latest standards BS EN 60669-2-1 and BS EN 55015, they are overload protected and are suitable for use with tungsten filament lamps only. Two way dimmers use push on/push off switches. They are not suitable for use with fluorescent loads or with electronic or with wire-wound transformers in low voltage lighting systems Conforming to the latest standards BS EN 60669-2-1 and BS EN 55015, they use `state of the art' micro controller based circuitry to provide soft start and overload protection. [. . . ] Single outlet for connection to a single TV or FM co-axial aerial lead. Twin outlet with TV/FM diplexer for connection to single coaxial aerial lead with combined TV & FM signals. Fully screened modular TV/Satellite outlets are available to fit Euro frontplates. [. . . ]