User manual MOOG 914-GBE BROCHURE

[. . . ] [. . . ] Optical power budgets are typically 20-26 dB over 10 km of singlemode fiber. Diagnostics are provided by on-board LEDs for power, optical, and data link status. A 12-pin header is also provided to drive LED diagnostics on a front panel or enclosure of a system. Typical Applications · Remotely Operated Vehicles (ROVs) and Tether Management Systems · Pipe Inspection Robots · Bomb Disposal Robots · Video Security Systems · Tactical Networks and Defense Systems · Industrial Process Control Features · · · · Low Latency (no switch buffer delays) Compatible with 10/100/1000 Mbps copper links per IEEE 802. 3 Wavelength selectable/interchangeable SFP transceivers Rugged design for marine environment, including 6000 psi pressure tolerant version Benefits · Provides fast response for time-critical links · Backwards compatible with legacy 10/100 Mbps links · Supports a wide range of optical options, including CWDM wavelengths for combining multiple cards on a single optical fiber Moog Components Group, Halifax Operations 77 Frazee Avenue, Dartmouth, Nova Scotia, Canada B3B 1Z4 · 888-302-2263 · +1-902-468-2263 · Fax +1-902-468-2249 www. moog. com/marine · email: mcg@moog. com Fiber Optic Multiplexers Data No. of Channels Ethernet Total Throughput Options 1 10/100/1000BASE-T Ethernet meets 802. 3 ab Up to 1000 Mbps Half Duplex 10/100 Mbps Ethernet also supported 1 - 2 singlemode (9/125 um) 1. 25 Gbaud uplink and downlink 1310 nm uplink, 1550 nm downlink (standard), CWDM options available 20 dB standard (others available) No SFP, 1310/1550 nm or CWDM wavelengths for combining multiple model systems on one singlemode fiber +5 VDC +/-10% regulated input required 4 W typical, per end Overvoltage and reverse polarity protection, fused Mechanical Dimensions Weight Enclosures LED See drawing below 90 g (0. 2 lb) Contact Moog for custom enclosures On-board diagnostic LEDs including: power, receive optical link valid, Tx and Rx activity, copper link speed and duplex Dual LC (SFP) RJ45 1 x 2-pin Molex 12-pin 0. 1 inch header -20 to +60 °C (operational) -40 to +85 °C (storage) 85% relative, non-condensing 1 atm or 6 k psi versions 30 g, 11 ms, per ISO 13628-6 Q1 level 5 g, 25 - 1000 Hz, per ISO 13628-6 Q1 level Optical Optical Fiber Data Rate Wavelengths Flux Budget Options Connectors Optical Ethernet Power Diagnostic Environmental Temperature Humidity Pressure Shock Vibration Electrical Power Supply Power Used Protection 914-GBE Dimensions Dimensions in inches [mm] Specifications and information are subject to change without prior notice. [. . . ] [. . . ]