User manual MORLEY PEDALS MK-41

[. . . ] Refer to them whenever you call upon your Sony dealer regarding this product. The following caution label is located inside of the unit. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] The deck starts to play the specified portion repeatedly. While the track you want to repeat is playing in normal, Shuffle, or Program Play, press REPEAT several times until "REPEAT 1" appears in the display. You can repeat the portion immediately after the currently specified portion by changing the starting and ending points. 1 Press A~B while "REPEAT A-B" appears. The current ending point B becomes the new starting point A, "REPEAT A-" lights continuously, and "B" flashes in the display. 2 Continue playing the track or press ) until you reach the new ending point (point B), then press A~B again. "REPEAT A-B" lights continuously and the deck starts playing repeatedly the newly specified portion. You can have the deck "shuffle" tracks and play them in random order. You can specify the playback order of the tracks on an MD and create your own programs containing up to 25 tracks. Press PLAY MODE repeatedly (or SHUFFLE once) until "SHUFFLE" appears in the display when the deck is stopped. Press PLAY MODE repeatedly (or CONTINUE once) when the deck is stopped until "SHUFFLE" disappears. Pausing after each track (Auto Pause) When the Auto Pause Function is on, the deck pauses after playing each track. Auto Pause is convenient when recording single tracks or multiple, nonconsecutive tracks. Select "Auto Pause" instead of "Auto Space" in Step 3 on "Inserting blank spaces while recording to tape" on this page. You can turn on the Auto Pause Function using the remote Z While the deck is stopped, press A. The Auto Space Function inserts a 3-second blank space between each track while recording from MDs to tapes, allowing you to use the AMS function during later playback. While the deck is stopped, press MENU/NO twice to display "Setup Menu". Turn AMS to select "Setup 04", then press AMS. Turn AMS to select "Auto Space", then press AMS. You can turn on the Auto Space Function using the remote Z While the deck is stopped, press A. If you turn off the deck or disconnect the AC power cord, the deck will recall the last setting of the Auto Space and Auto Pause Functions the next time you turn on the deck. You can adjust the level of an analog signal for output to an amplifier connected through the LINE (ANALOG) OUT jacks. [. . . ] /The MD may not be recorded (the music calendar does not appear). 6 µW* * This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. US and foreign patents licensed from Dolby Laboratories Licensing Corporation. Design and specifications are subject to change without notice. [. . . ]