User manual MORLEY PEDALS PWASSES

[. . . ] To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. CAUTION The use of optical instruments with this product will increase eye hazard. Certain countries may regulate disposal of the battery used to power this product. Please consult with your local authority. [. . . ] (CD player: "LOW" flashes. ) 2 Available features Using the remote control Press SOUND repeatedly to select the sound qaulity you want. On the CD player 1 Press DSPL/MENU until the MENU screen appears. 2 Press F or f to select "SOUND, " then press DSPL/MENU . 3 Press F or f to select the sound quality you want, then press DSPL/MENU to enter the selection. LOW m MID (Continued) 25 Adjusting sound quality Notes · When you select CUSTOM sound, sound may be distorted depending on your sound settings when you turn up the volume. · You may feel a difference in sound volume between the CUSTOM sound setting and other sound settings. Adjust the volume for your preference. 3 Flick the jog lever toward . or > repeatedly to select the shape of the wave from the 3 shapes stored in memory for each frequency range, then turn the VOL +/­ repeatedly to select the sound volume. or > repeatedly to select the shape of the wave, then press F or f to select the sound volume. ) The G-PROTECTION function The G-PROTECTION function has been developed to provide excellent protection against sound skipping during many active uses. MID A: Frequency range B: Sound volume (To turn up the volume, use VOL ­. To turn it down, use VOL +. ) 1 m MID While play is stopped, press DISPLAY until the display changes. (CD player: While play is stopped, press and hold DSPL/ MENU until the MENU screen appears. Press F or f to select "OPTION, " then press DSPL/ MENU. ) Flick the jog lever toward . If you have changed the setting, the length of time already set appears. Available features 2 2 3 3 (Continued) 27 Stopping playback automatically Locking the controls (HOLD) You can lock the controls on your CD player to prevent accidental button presses. The OPR lamp flashes if you press any button when the HOLD function is activated. Slide HOLD in the direction of the arrow. You can use the HOLD function with both the CD player and the remote control. You can still operate your CD player using the remote control when HOLD on the remote control is set to off. To unlock the controls Slide HOLD in the direction opposite to that of the arrow. Note Even if the HOLD function is working, "HOLD" will not appear in the display of the remote control. 4 Turn VOL +/­ to select the length of time you want to set, then press the jog lever to enter the selection. (CD player: Press F or f to select the length of time you want to set, then press DSPL/MENU to enter the selection. ) · To increase/decrease by 5 minutes: Turn VOL +/­ repeatedly. (CD player: Press F or f repeatedly. ) · To increase/decrease by 1 minute: Keep turning VOL +/­. (CD player: Press F or f for 2 seconds or more. ) To return to the previous screen Press x. (CD player: Press ­. ) To cancel the setting operation Press DISPLAY or x for 2 seconds or more. (CD player: Press x/CHG. ) To check the length of time before the CD player stops playback During play, perform steps 1 - 3. [. . . ] To start play from the first track, press the jog lever during stop (CD player: Press and hold u) until the first track starts playing, or open the lid of the CD player. Or remove all power sources, then insert the batteries or connect the AC power adaptor again. (pages 15, 16, 33, 35) c Close the lid of the battery compartment firmly. (page 33) c AUDIO OUT is set to "LINE. " Adjust the volume of the connected device. [. . . ]