User manual MORPHY RICHARDS IB21008

[. . . ] To begin drying, remove the nozzle from your dryer and blast your hair with the dryer on the highest speed setting until your hair is 50% dry ­ there is no point trying to style your hair until it is almost dry. As your hair begins to dry, switch off your dryer and attach the concentrator nozzle. Use the sectioning clips to split the hair into manageable sections ­ this will ensure that each section is thoroughly dried and styled, as leaving moisture in the hair can cause frizz. [. . . ] This number can be found on the handle of the product. All Morphy Richards products are individually tested before leaving the factory. In the unlikely event of any appliance proving to be faulty within 28 days of purchase, it should be returned to the place of purchase to be replaced. If a fault develops after 28 days and within 24 months of original purchase, you should contact the Helpline number quoting the model number of the product, or write to the address below. You will be asked to return the product (in secure packaging) to the address below along with a copy of proof of purchase. The After Sales Division, Morphy Richards Ltd, Talbot Road, Mexborough, South Yorkshire, England, S64 8AJ Helpline (8. 30-5. 00 Mon-Thurs/8. 30-4. 00 Fri) UK 0870 060 2614 · Republic of Ireland 1800409119 For extra tips on styling, and details of the rest of the products in the Morphy Richards range, please see our website www. morphyrichards. com Morphy Richards products are intended for household use only. Morphy Richards has a policy of continuous improvement in product quality and design. The company therefore reserves the right to change the specification of it's models at any time. Registered address: Morphy Richards Ltd, Talbot Rd, Mexborough, South Yorkshire, S64 8AJ SAFETY INFORMATION When using your hair dryer, you must follow basic safety precautions. Please read these instructions carefully before using the product and keep them in a safe place for future reference. 01 Use this appliance for it's intended use only. 02 To protect against the risk of electric shock, do not immerse the appliance in water or in any other liquids. 03 Check that the voltage on the rating plate of the hair dryer corresponds with your house electricity supply which must be AC (alternating current). 04 Always unplug the appliance when it is not in use. 05 Do not leave the hair dryer switched on whilst unattended. 06 In the event of cable damage, do not attempt to replace the mains cable ­ return to Morphy Richards. [. . . ] Ensure the filter is completely dry before refitting. To refit, locate the air filter into the filter cover and click back into place. WIRING This product is fitted with a 13 amp (BS1363) plug. Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply, which must be AC (alternating current). [. . . ]