User manual MORPHY RICHARDS IB28022

[. . . ] Plug the mains plug into the wall socket and switch on the wall socket The LED clock display will flash. Press and hold the TIME button (11) and simultaneously hold down the HOUR button (9) or the MINUTE button (8). The LED clock display will fast forward the minutes and hour segments. Release the TIME button (11) when your desired time is set. [. . . ] Battery back-up is designed to operate for a short period only. If the unit is not to be used for a prolonged period, remove the battery to avoid battery leakage. In the interests of environmental safety : dispose of batteries safely. 4 5 P. 3 2 Band Alarm Clock Radio 10 15 9 8 7 6 4 5 P. 2 P. 4 Setting the alarm time 1 Press and hold the ALARM button (13) and simultaneously press the HOUR (9) or MINUTE button (8) to set the display to the desired alarm time. Release the ALARM button (13) when the desired alarm time is set. To stop the alarm tone The alarm is programmed to run for 1 hour 59 minutes. 1 To stop the alarm, press the ALARM button (13). The alarm will stop and will operate again 24 hours later. To stop the alarm temporarily, press the SNOOZE button (14). The alarm will sound again 9 minutes later. To switch the alarm setting off permanently, slide the FUNCTION SELECTOR switch (1) to the `Off' position. Wake up to the radio alarm 1 2 Switch the FUNCTION SELECTOR switch (1) to the `ON' position. Set the BAND SELECTOR switch (6) to select either FM or AM wavebands as desired. Adjust the VOLUME control (7) to a suitable level. Slowly adjust the TUNING control (5) to the desired station. To check that the alarm time has been set, slide the FUNCTION SELECTOR switch (1) to the `AUTO' position. The radio station will wake you up at the set alarm time. The alarm will automatically turn off after 1 hour 59 minutes. 2 3 3 4 5 Snooze function The alarm can be interrupted for a 9 minute period. 1 Press the SNOOZE button (14), after 9 minutes the radio or alarm buzzer will sound again. To set the sleep function Your clock radio is equipped with a sleep function that will turn the radio on and switch it off automatically after a set period of time from between 59 minutes to 1 minute. Pressing the hour button (9) will extend the sleep time to 1 hour 59 minutes. 1 Press the SLEEP button (12) the LED display will show 0:59 sleep time at the same time the radio will come on and stay on for 59 minutes. Press and hold the SLEEP button (12) whilst pressing the MINUTE button (8) or HOUR button (9) or press and hold the sleep button (12), the sleep time shown on the LED display will start descending. Release all buttons when the desired sleep time is shown on the LED display. [. . . ] ATTENTION: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside the unit. Refer any servicing to qualified personnel. Morphy Richards Limited Talbot Road Mexborough South Yorkshire S64 8AJ Your post office will provide a certificate of posting. The product will be repaired and returned to you promptly. [. . . ]