User manual MORPHY RICHARDS IB28043

[. . . ] Should the fuse in the 13 amp plug require changing a 3 amp BS1362 fuse must be fitted. Switching on, and setting the clock time Before any alarm functions can be used on your alarm clock radio you must first set the clock to the correct time. Plug the mains plug into the wall socket and switch on the wall socket. 2 3 The clock LED display (10) will flash. Press and hold the TIME button (4) and simultaneously hold down the hour button (2) or the minute button (1). [. . . ] The display will be extinguished to conserve battery life but the memory will retain details of the clock time and alarm settings. If the optional battery is not installed in case of the AC power failure the display will blink to indicate the power was interrupted. You will need to reset the clock and alarm. Battery back-up is designed to operate for a short period only. If the unit is not to be used for a prolonged period, remove the battery to avoid battery leakage. In the interests of environmental safety : dispose of batteries safely. P. 3 P. 4 Wake up to the radio alarm Having selected your station and set the volume at the desired level, proceed as follows: 1 2 3 Switch the ON/OFF/AUTO switch (14) to the `AUTO' position. Press the ALARM SET button (3) and simultaneously press the HOUR button (2) and then the minute button (1) until the desired alarm time is set. To check the wake up time simply press the ALARM SET button and the clock will show the present time. Snooze function The alarm can be interrupted for a 9 minute period. 1 Press the SNOOZE button (6), after 9 minutes the radio or alarm buzzer will sound again. To set the sleep function Your clock radio is equipped with a sleep function that will turn the radio on and switch it off automatically after a set period of time from between 1 minute to 1 hour 59 minutes. 1 2 Ensure all controls are preset to `wake to radio'. Press the SLEEP button (5) the LED display (10) will show 0:59 sleep time at the same time the radio will come on and stay on for 59 minutes. Press and hold the SLEEP button (5) whilst pressing the MINUTE button (1) the sleep time shown on the LED display (10) will start descending. Press the HOUR button (2) to set the sleep time to 1:59. Release all buttons when the desired sleep time is shown on the LED display (10). After the set sleep time has elapsed, the radio will automatically switch off. To switch off before the set sleep time has elapsed press the SNOOZE button (6). The preset wake up time will continue to be registered in the timer memory and the radio will switch on automatically the next day. Ensure the station you select will be transmitting at the preset alarm time. Wake to buzzer 1 · Set the controls as for `wake to radio' and set the VOLUME/BUZZER control (7) to the BUZZER position. The dial will click when the buzzer position is reached. [. . . ] Should your product develop a defect within the guarantee period but after the replacement period, please return the product to the following address, together with the proof of purchase, brief details of the symptoms and your own name and address. Registered address Morphy Richards Limited Mexborough South Yorkshire S64 8AJ Your post office will provide a certificate of posting. The product will be repaired and returned to you promptly. Technical specification AC Power supply Battery back-up Radio : : : : 230v 50Hz 9V DC type 6LR61/PP3 (not included) FM 88Mhz - 108MHz MW 530Khz - 1600kHz Warning labels WARNING: to reduce the risk of electric shock, do not expose this appliance to rain or moisture. ATTENTION: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside the unit. [. . . ]