User manual MORPHY RICHARDS IB70446

[. . . ] These are indicated in the text by the following two conventions: WARNING: Danger to the person!In addition we offer the following safety advice. Other safety considerations · · Do not use any chemical detergents, perfumes, alcohol etc in the water. Repairs to electrical appliances are only to be undertaken by trained personnel. Unprofessional repairs can be dangerous for users. [. . . ] WARNING: To avoid injury, the cleaner should be switched off during breaks or pauses of work. For extra safety apply the trigger safety lock. If you leave the working area, please switch the cleaner off and unplug. 4 To stop the steam jet, release the steam trigger. IMPORTANT: Do not hold the steam jet concentrated in one place for too long. · To control the steam temperature and the cleaning power move the handle closer to or further away from the surface being cleaned. Accessories WARNING: Unplug the cleaner and allow to cool before fitting or changing attachments as they become hot during use. Attach the desired accessory to the hose handle Â. Extension tubes can be attached to the handle for extra reach. 1 Push the extension tubes È onto the handle connection nozzle as far as they will go until you hear a click J. · Some tasks may be easier with only one tube fitted or none at all. 2 To connect the desired accessory directly to the hose handle, slide the handle into the accessory head or tube until it locks in place K. Steam cleaning 1 Ensure the safety lock Ê is off. Push the lock from the left side to lock the trigger and push from the right to release the lock H. 2 Press the steam trigger Á and steam will be emitted from the nozzle. Direct the steam at a cloth or into a bucket or sink until the steam is emitted evenly. WARNING: At the start hot water may be ejected. 3 Keep the steam trigger pressed and direct the steam at the surface to be cleaned, removing the dirt by moving the steam jet backwards and forwards over the area. J H K 6 Floor nozzle Ú manufacturer. The floor nozzle is used for the cleaning of large, washable walls and floor areas. The floor nozzle can be used with or without the cotton towel Û. · Sensitive surfaces, wood, linoleum etc. 1 Fit the elbow attachment Ò to the floor nozzle and twist 1/2 a turn L. 2 Fit the floor nozzle to the extension tube or handle M. 3 To fit the cloth to the floor nozzle pull the cloth under the clips on both sides. Extra cloths can be ordered through our helpline. Alternatively any strong, uncoloured cotton cloths may be used N. [. . . ] 2 The appliance has been used on a voltage supply other than that stamped on the products. 3 Repairs have been attempted by persons other than our service staff (or authorised dealer). 4 Where the appliance has been used for hire purposes or non domestic use. 5 Morphy Richards are not liable to carry out any type of servicing work, under the guarantee. [. . . ]