User manual MOTOROLA 3300

[. . . ] 1 1 2 2 WELCOME Congratulations on your purchase of a cellular telephone from Motorola, the world leader in cellular technology. All Motorola cellular telephones are designed and manufactured to meet Motorola's exacting specifications and world-class quality standards. This cellular telephone has been manufactured to withstand rigorous durability tests including temperature, humidity, shock, dust, vibration and a drop test. Our testing standards, our commitment to Total Customer Satisfaction and over sixty five years of experience in personal communications means you can depend upon the quality of this Motorola product. WELCOME To Turn On 1. [. . . ] Roam: Shows time and charge for other systems since last reset. Total: Shows the sum of Home and Roam. To reset all resettable call timers/meters: Cumulative call timers/meters: Shows the total time and charge for the life of the telephone. You will find the following cumulative call timers/meters in the telephone: Home: Shows time and charge for home system since the telephone was put into service. Roam: Shows time and charge for other systems since the telephone was put into service. Page 39 2 ADVANCED INFORMATION To Display Call Timers Select by scrolling to the desired timer in the list of call timers: - Individual Call Timer - Total Resettable Call Timer - Home Resettable Call Timer - Roam Resettable Call Timer - Total Cumulative Call Timer - Home Cumulative Call Timer - Roam Cumulative Call Timer to go forward to go backward To Display Call Meters Displaying meters requires that the telephone is programmed with a home and roam rate. See the section, "Programming of Rates". Select by scrolling to the desired meter in the list of call meters: - Individual Call Meter - Total Resettable Call Meter - Home Resettable Call Meter - Roam Resettable Call Meter - Total Cumulative Call Meter - Home Cumulative Call Meter - Roam Cumulative Call Meter to go forward to go backward Page 40 ADVANCED INFORMATION Programming of Rates 2 To display call meters, the home and the roam rate must be programmed. The rates can be entered in either currency per minute or charge units per minute. To programme the rates: Security Code Home Rate Roam Rate Note: The roam rate initially defaults to the home rate to prevent you from setting it to zero by mistake. Automatic Monitor Displays This feature can be used to automatically display the time or charge for a call during and after each call (see note, CALL MONITORING). To enable/disable: Select auto timer or auto meter using the scroll keys. to toggle the function on/off. Page 41 2 ADVANCED INFORMATION CALL RESTRICTIONS Call restriction settings are stored in the telephone, but may affect usage of the SIM card. Four types of restrictions are available. - Restricted Keypad Dialling - Restricted Memory Access - Restricted Incoming Calls - Restricted Phone Number Length They may be enabled/disabled independently to suit your needs. Restricted Keypad Dialling Prevents any keypad dialling except for "112" emergency dialling. Short-numbers, which have not been prohibited by the Restricted Memory Access feature, may be called but not programmed. To enable/disable: To toggle the function on/off: Security Code Page 42 ADVANCED INFORMATION Restricted Memory Access 2 With restricted memory access you select a range of short-numbers which should always be accessible for storing and recalling. For the short-numbers outside the range you have the following alternatives: Protect: Storing and recalling are not allowed. Recall Only: Only recalling is allowed. To enable/disable: Security Code Select "protect" or "recall only" using the scroll keys and then Lower limit Higher limit Restricted Incoming Calls Only outgoing calls are allowed. To enable/disable: To toggle the function on/off: Security Code Page 43 2 ADVANCED INFORMATION Restricted Phone Number Length Among other uses, this feature can be used to prevent international calls. Only phone numbers less than or equal to the selected maximum number of digits may be called. To enable/disable: Security Code Display shows present maximum To enter new maximum: New maximum (1 to 20) Note: DTMF signalling is disabled. "112" emergency calls are still possible. Digits after pauses in telephone numbers do not count towards length limit. Full Service Use of this feature removes all restrictions previously selected. Security Code Page 44 ADVANCED INFORMATION CALL BARRING 2 Call barring applies only to the SIM Card, not the telephone. By subscribing to call barring, you may bar incoming and/or outgoing calls by entering a special key sequence. The key sequence includes a "barring code" indicating which calls should be barred and a password. The first password is provided by the network operator when you subscribe to the service. The most common types of call barring are: All outgoing calls Barring code: 33 Note: If barring of all outgoing calls is activated, activating other types of outgoing call barring will not make sense. [. . . ] See Mute Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 N Notepad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 tones-on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 O One Minute Audible Call Timer . . . . . . . . . . . . . . . . . . . Audible Call Timer . . . . . . . . . . 38 Overnight Internal Charger . . . . . . . . . . . . . . . . . . . . . . . . . . 71 P Pauses in Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 PIN Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Data card enable/disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]