User manual MOTOROLA 8400

[. . . ] Phone Book Menu Quick Access Menu Options Menu Quick Reference English Special Keys S Press to turn phone on and off. Press to see more information on the operation currently displayed. Press to accept call, setting, option, . . . Press to access the Quick Access features. [. . . ] On Switches Talk and Fax mode on for the next and all subsequent calls. Off Switches Talk and Fax mode off for the next and all subsequent calls. Talk and Fax This is a network feature that allows you to speak and then send or receive a fax during the course of a single call. A Your phone supports a data and fax transmission speed of up to 9600 bps. Before making a Talk and Fax call, ensure that: · Your phone is "fax-ready" (it has been switched off, connected to the fax, then switched back on). Connecting your phone to the fax in the middle of the call will not work. · The Talk and Fax mode is set to On. A Talk and Fax call automatically switches to fax mode when you start sending the fax. While the fax is being transmitted, the message Fax in progress will be displayed. The call automatically ends when the fax transmission is complete. You cannot switch back to voice mode in the same call. A While a Talk and Fax call is active, incoming call services like Call Waiting and Call Holding are suspended. Using the Options Menu 39 English OCall Holding and Call Waiting Your phone supports the GSM network options of Call Holding and Call Waiting. Using these options you can place a current phone call on hold and accept an incoming call or start a second call. The Call Waiting menu item has two settings On or Off. If you select Off, you will be not be notified of waiting calls. The person trying to contact you will either receive the busy tone, or be diverted by the `Detailed Diverting - If Busy' option. If Call Waiting is On, you will be notified of a waiting call by an audible alert and by the message Call Waiting - Answer?. You can press the O key to accept the waiting call, or use the M key to scroll to an alternative option and then press O. A The following points summarise the more common situations: · To end the active call, press O. If you have a call on hold it is automatically connected. · To put the active call on hold and make another call, press M and select the Hold Call option, then press M again and select the Make New Call option1. · To put the active call on hold and reconnect a held call, press M and then select the Switch Calls option. · To accept a waiting call, press O. If you prefer to end the active call before accepting the waiting call, press M and select the End Active Call option, or End Held Call option as appropriate. · To reject a waiting call, press M and select the Reject Call Waiting option (or simply press the C key). A If you have Caller Line Identification, the caller's number is displayed instead of the Call Waiting message. Call Holding and Call Waiting Scenarios The display will automatically change according to the status of your current call (or calls) and will propose the option that you are most likely to want. Press O to accept this option or press M to scroll through the alternative options. By following this procedure you will find that even the triple combination of an active call, a held call, and a call waiting is easy to manage. If you have an active call, a call on hold and a call waiting, you cannot accept the waiting call until you end either the active call or the held call. 1. [. . . ] 50 Sending SMS messages . . . . . . . . . . . . . . . . . . . . . . . 45 Service centre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Set audible call timers . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Set in-call display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]