User manual MOTOROLA DC600 Bluetooth Adapter Quick Start Guide

[. . . ] Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www. hellomoto. com 1-877-MOTOBLU 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) Part Number: 6809494A97-C MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. All other product or service names are the property of their respective owners. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. [. . . ] Always obey the laws and regulations on the use of these products. 1 Holding your headphone close to the stereo adapter, place the headset into pairing mode. If using the Motorola HT820 Bluetooth Stereo Headphone, place in pairing mode by pressing and holding the headphone's Call button for approximately 6 seconds until the indicator light is solidly lit. For other products, refer to your headset's user's guide for details. 2 Turn on the stereo adapter by pressing in the Power button. After a few moments, the Pairing Button indicator light begins blinking to indicate the power is on. © Motorola, Inc. 2005. 3 PAIR WITH BLUETOOTH HEADSET CONTINUED 4 PAIR WITH BLUETOOTH PHONE Enable your stereo adapter to receive music from the built-in MP3 player of your Bluetooth A2DP-capable phone: Note: These steps are for most Motorola phones. Certain phones require additional steps to enable stereo audio streaming (A2DP Profile). See your phone's user's guide to verify proper steps. 1 Turn on the stereo adapter by pressing in the Pairing Button with Indicator Light Power Button Power button. After a few moments, the Pairing button indicator light begins blinking to indicate the power is on. 3 Press and hold the Pairing button on the stereo adapter until the indicator light remains solidly lit (about 5 seconds). The stereo adapter searches for Bluetooth devices. Play music on your home audio system and send the music wirelessly to your Motorola Bluetooth Stereo Headphone. Use the stereo adapter's high power Bluetooth (Class 1) with other Class 1 devices to roam around your house further than the 30 foot range of most Bluetooth products. IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side to complete initial setup of your DC600. FEATURES CONTINUED Play MP3s from your home computer or laptop and listen to them over your home audio speakers using the Motorola Stereo PC Adapter or embedded Bluetooth module. Use your stereo adapter with any Bluetooth stereo audio device, even products from other manufacturers. FRONT PANEL CONTROLS The DC600 Home Stereo Adapter contains the following front panel controls and indicators. Housing Feet Pairing Button with Indicator Light Power Button Housing feet are built-in and can be rotated 90 degress allowing the stereo adapter to stand vertically. For horizontal orientation, the feet remain flush for compact storage. BACK PANEL CONNECTORS The DC600 Home Stereo Adapter contains the following back panel connectors. Audio Out Jacks When you see this symbol on a Motorola product, do not dispose the product with household waste. Recycling Mobile Phones and Accessories Do not dispose of mobile phones or electrical accessories, such as chargers or headsets, with your household waste. In some countries or regions, collection systems are set up to handle electrical and electronic waste items. Contact your regional authorities for more details. If collection systems aren't available, return unwanted mobile phones or electrical accessories to any Motorola Approved Service Centre in your region. Audio In Jacks Power Jack OPERATING WITH BLUETOOTH DEVICES Once paired with a Bluetooth device, the stereo adapter automatically connects to the device when it is in range and turned on. The DC600 Home Stereo Adapter stores pairing information for up to eight Bluetooth devices. [. . . ] The DC600 Home Stereo Adapter stores pairing information for up to eight Bluetooth devices. Device IDs are stored in the gateway's memory in the order entered. If you try to pair with more than eight devices, the oldest paired device is removed from memory. DC600 FUNCTIONS Function Turn On DC600 Action Press in the Power button. The DC600 attempts to connect to the last device it was connected to. [. . . ]