User manual MOTOROLA DC800 Quick Start Guide

[. . . ] Note: To operate with the DC800 Home Stereo Adapter, your Bluetooth audio device must support A2DP Profile capability. Note: To maintain compliance with RF exposure guidelines, you must keep the DC800 Home Stereo Adapter at least 20 centimeters (8 inches) away from any person. 1 AUDIO CONNECTIONS 2 POWER CONNECTIONS Make the following audio connections to your stereo adapter (using the supplied cables): Audio Out Jacks Audio In Jacks Make the following power connection to your stereo adapter: 1 Connect the Audio Out jacks on the stereo adapter to unused Audio In jacks on your home stereo system. Power Jack 1 Plug the included AC power supply into the Power Jack on the stereo adapter. 2 Connect the Audio In jacks on the stereo adapter to unused Audio Out jacks (such as Tape Out) on your home stereo system. Note: If your home stereo does not support Line Out audio, you may have to connect through the headphone jack with the included RCA-to-headphone cable. [. . . ] Once the connection is established, the indicator light changes to a slower, pulsing light. 2 From the phone, perform a Bluetooth device The phone lists Bluetooth devices it finds. discovery while holding it close to the adapter. 3 Select Motorola DC800. 4 Select OK or Yes to pair your stereo adapter 5 6 Select OK. The Pairing button indicator light and phone. Enter the passkey: 0000 flashes rapidly to indicate pairing is successful. USE 5 VerifyTEST AND and stereo the headphone adapter work together: TROUBLESHOOTING My stereo adapter doesn't find my headphone. Make sure the headphone is close to the stereo adapter and in pairing mode, and the Pairing button indicator light on your stereo adapter is on and steady (see step 3). My stereo adapter worked with my phone before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone. If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature and pair your phone and stereo adapter again (see step 4). If you need more help, contact us at 1- 877-MOTOBLU. FOR DETAILS ABOUT YOUR STEREO ADAPTER visit us at www. hellomoto. com/bluetooth and click Support. 1 2 On your home stereo system, play music from your favorite source and turn the stereo receiver to that source. If your stereo adapter and headphone are successfully paired, you will hear music on the headphone. To verify the phone and stereo adapter work together: 1 2 On your phone, select and play MP3 music. On your home stereo system, select the input the adapter is connected to. If your stereo adapter and phone are successfully paired, you will hear the MP3 music on your home stereo system. FEATURES DC800 Bluetooth® Home Stereo Adapter Your DC800 Home Stereo Adapter connects to your home audio system and turns it into a wireless music system. [. . . ] (audio is transmitting) Reenable Audio Transmission Turn Off DC800 Tap Pairing button. Indicator light blinks with a slow pulse. [. . . ]