User manual MOTOROLA DIGITAL CORDLESS PHONE AND ANSWERING SYSTEM-MD681

[. . . ] MD680 Series Digital 5. 8 GHz Cordless Telephone System with Answering Machine User's Guide > Welcome Congratulations on your purchase of a Motorola product!Product registration is an important step. Registering helps us facilitate warranty service and permits us to contact you if your Motorola product requires an update or other service. To register your product online, visit: www. motorola. com/warranty/cordless Please retain your original dated sales receipt for your records. [. . . ] Volume Buttons Note: This procedure is the same for adjusting the volume on the handset speakerphone and the headset while on a call. Using the Speakerphone on the Handset (handsfree operation) Using the Basic Functions Action Press SPEAKER PHONE. The SPEAKER PHONE button lights up and HANDSFREE ON displays briefly. 30 Using Call Waiting If you have call waiting service from your telephone company, you can put a call "on hold", to answer a second call. Action 1 Press ON on the handset or FLASH on the base station to answer a second call. 2 Press ON again to end the second call and return to the first call. Muting a Call Action 1 Press MUTE (a) when on a call. 2 Press MUTE (a) again to unmute the call. Using the Basic Functions 31 Putting a Call on Hold Action 1 Press HOLD (a). v on the base station flashes and CALL ON HOLD displays on the handset. If Clock Mode is on, the CALL ON HOLD reminder on the handset displays for only 5 seconds. 2 To return to the call, press v on the base station or ON on the handset. Note: A call can remain on hold for up to 5 minutes. After 5 minutes, CALL ON HOLD RING BACK!You have 30 seconds to return to the call before it is dropped/ disconnected. Saving a Name/Number in the Phonebook Using the Basic Functions 32 Saving names and numbers in the phonebook makes it easy to dial numbers you call frequently. You can enter up to 50 numbers directly into each phonebook or add them from the caller ID or redial list. Base Station Phonebook The base station phonebook is unique and is not accessible by any handset. Handset Phonebooks Each handset phonebook is unique and is not accessible by other handsets or the base station. To save a number in either phonebook: Action 1 From the standby screen, enter the phone number, then press PHNBK (a). Note: Be sure to include long distance codes and pauses if required. 2 At the ENTER NAME prompt, use the keypad to enter the name (see page 41). 3 Press SAVE (a) to store the name and number. Note: If the phonebook is full, PHONEBOOK IS FULL displays. Tip: Erase numbers you no longer call to make room for new ones. 4 Press and hold CLEAR for 2 second on the base station or OFF for 2 seconds on the handset to return to the standby screen. Using the Basic Functions Inserting Pauses in a Phone Number Action When you want to insert a pause, press PAUSE (a). When you call a number with a pause, the phone waits a few seconds before transmitting the next digits in the dialing sequence. This is useful when you have to dial a number for access to an outside line, or for going into a voicemail system. 33 Saving a Caller ID or Redial Number in the Phonebook Action 1 Display and highlight the number, then press SELECT (a). [. . . ] Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage. 67 Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola housings, or parts, are excluded from coverage. [. . . ]