User manual MOTOROLA DRC800

[. . . ] If your device does not respond, repeat steps 2 - 3 with the next code in the list. . If the remote does not recognize the code, the LED will turn off. Retry the code (by repeating steps 2-3 using the next code listed for your brand), or search for a device code. See "Searching for Codes". Note: You have 10 seconds to press USING YOUR REMOTE To select a device to control, simply press one of the device mode keys (TV, AUDIO, DVD/VCR, CABLE) at the top of your remote. [. . . ] Enter 9 9 0 to tell the remote you are verifying the device code. Press 1, then count the LED blinks and write down the number. If the LED does not blink, the number is 0. This is the first digit of the device code. Press 2, 3, and 4 to obtain all four-code digits. Note: Favorite channels must be preselected through the Electronic Programming Guide before this key works. Input Aspect PIP ON/OFF · Press this Key To. . . Turn the selected device ON or OFF Display the help screen (only available in CABLE mode) Return to last selected channel VOL +/CH +/Increase or decrease volume Select the next or previous channel Move up or down through menu screens or the Electronic Program Guide Exit any On-Screen Display (OSD) and return to regular viewing Display channel and program information Access the cable guide Select the video source Change the viewing aspect (if available) Turn Picture-inPicture (PIP) on or off (if available) Swap the PIP signal to the main display (if available) Move the position of the PIP display Select the next or previous channel in the PIP display (the main display does not change) 2. · 3. Audio, DVD/VCR, Select a device TV, Cable Direct access to Video On Demand (VOD), where available PIP SWAP SEARCHING FOR CODES If none of the codes listed under "Device Codes"on the back of this guide match your device, you can search for a set of commands that will work. Your remote will sample all the codes in its system for that device mode to find one that will allow you to control your device. Press and hold a device mode key (AUDIO, DVD/VCR, or TV) for at least six seconds. The LED for each device key lights up, then the key for the device you selected remains on. Press a function key (such as Power or Mute). The following function keys are valid for Searching (Power is recommended): · Power · Mute · Play · CH + · Stop The device key's LED blinks three times, then turns off. The remote will send the IR command for the function you pressed in Step 2. If the device performed the function you pressed, press OK. The remote will now control the device you selected in Step 1. If the device did not perform the function you pressed, repeat step 3. Press " to retry the previous code. PIP Move PIP CH +/- CHANGING VOLUME LOCK Locking the volume controls to a single device makes it easier to control volume, without having to guess whether the volume will change. If you lock the remote's volume controls to the TV (for example), you will always be able to change the volume to the level you want, without having to adjust it on multiple devices. Press and hold the device mode key (TV, AUDIO, DVD/VCR, or Cable) corresponding to the device you want to control volume for at least six seconds. The LED for each device key lights up, then the key for the device you selected remains on. The device key's LED blinks three times, indicating it has locked the volume control to the device you selected. The AUDIO device key always controls its own volume, regardless of the device is locked to volume control. User Guide OVERVIEW Your new Motorola DRC800 universal 4-in-1 remote operates your Motorola or or other manufacturer's cable settop box and up to three other devices. In addition, the DRC800 provides advanced features such as Digital Video Recording (DVR) control and Picture-in-Picture (PIP) support. [. . . ] 3. Cable Audio INSTALLING BATTERIES Your remote requires 2 AAA batteries. The first set of batteries is included, and should last up to 6 months under normal usage. Remove the battery case cover and the old batteries (if necessary). To specify a device 1. Look up the device you want to control in the device code list on the back of this guide. [. . . ]