User manual MOTOROLA DSR315

[. . . ] DSR315 User Guide This user guide is for use with DSR315 Digital Satellite Receivers Publication #494862-001 Rev D All Rights Reserved General Instrument Corporation doing business as the Broadband Communications Sector of Motorola, Inc. San Diego, California 92121 Internet: http//www. mot. com Copyright © 2004 Motorola, Inc. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation or adaptation) without written permission from Motorola, Inc. Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to provide notification of such revision or change. [. . . ] Contact your service provider for assistance. · · · · · · 3 DSR315 User Guide 19 3 Authorizing Your Receiver · · · Press the EXIT key on the remote control. Then press the number keys for the authorization channel. Press the OPTIONS key on the remote control. From the Options menu, select option 6 (Change System Settings), and the System Settings menu will appear. Select option 4 (Check System Status), and the System Status menu will appear. Telephone the company that provides your programming subscription, and ask to authorize your unit. When your receiver has received the authorization message the Trip Counter on the Installation Settings menu will advance. · · · Completing the Receiver Connections to Your Entertainment System You will need to make changes to connect your VCR. · Connect the top/left TV terminal on the back panel of the receiver to the IN terminal on the VCR. If you had already connected this cable to your TV you must disconnect and connect it to your VCR. Connect the OUT terminal(s) on the VCR to the VHF IN terminal(s) on the TV. · Connections to Audio/Video Monitor Complete the following steps if you only plan to connect the satellite receiver to an audio/video monitor: · Using standard RCA-type audio/video cables, connect the top/left TV (VIDEO output) terminal on the rear panel of the receiver to the video input terminal on the monitor (or TV using the baseband inputs). 20 Installation · Using standard RCA-type audio/video cables, connect the two bottom/left speaker (R and L) terminals on the back panel of the receiver to the audio input terminals on the monitor (or TV using the baseband inputs). Connections to Audio/Video Monitor and VCR Complete the following steps if you plan to connect the satellite receiver to an audio/video monitor and VCR: · Using standard RCA-type audio/video cables, connect the top/right TV (VIDEO output) terminal on the rear panel of the receiver to the video input terminal on the VCR. Using standard RCA-type audio/video cables, connect the two bottom/right Speaker Icon (R and L) terminals on the rear panel of the receiver to the audio input terminals on the VCR. Using standard RCA-type audio/video cables, connect the audio and video inputs on the audio/video monitor (or TV using baseband audio/video inputs) to the outputs on the VCR. If your entertainment center is enabled for Dolby Digital AC-3 Version 5. 1 (six channel) surround sound, connect this port to one end of the orange RCA cable and the other end of the orange RCA cable to your surround processor. · · · After you complete the installation procedures, you may wish to use the on-screen menus to make adjustments to the satellite receiver's operation. DSR315 User Guide 21 3 22 Installation Additional Features Options. The Options menu provides access to all of the onscreen menus. It appears when you press the OPTIONS key on the remote control or when you press the MENU key on the receiver followed by selecting OPTIONS from the main Menu. The Change System Settings menu provides access to menus that allow you to adjust the operation of your system. Viewing and Language Settings Channel Information. The Channel Information option allows you to turn the header (top of screen) and banner (bottom of screen) On or Off. The Subtitles option allows you to select the language for subtitles (if available for the particular program) or keep them turned off. The Language option allows you to select the language of the onscreen menus and audio for your programs. The TV Viewing option allows you to select the size of the viewing area. Select the Standard option if your TV screen is a typical screen with a 4:3 ratio of width to height. Select Wide if your TV screen is a wide screen with a 16:9 ratio (as in HDTV's or digital TV's). [. . . ] This option is used for entering the name that is to be displayed when being called from the specified telephone number. Choose option 2, use the channel up/down buttons to scroll through the available characters, both upper case and lower case letters are available as well as numbers, spaces and various other characters. This option allows you to enter the number you want to associate with the name you entered in option 2 (Name). They are entered using the number keys on your remote control. 34 Caller Announcement Banner The caller announcement banner is displayed over active video whenever a telephone call is received. [. . . ]