User manual MOTOROLA H710

[. . . ] Under normal use, the expected life of the rechargeable battery is approximately 400 charges. 3 PA Your Heads AIR set and Phone Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones: Before you can use your headset, you must pair (link) it with your phone. Step A - ENSURE HEADSET IS IN PAIRING MODE Open the headset boom to power on the headset and initiate pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode. Indicator Light (steadily blue for pairing mode) 1 On your Motorola phone, press M (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists Bluetooth devices it finds. 2 Select Motorola H710. 3 Select OK or Yes to pair your headset with 4 5 your phone. [. . . ] a On your Motorola phone, press M (Menu) 1 Turn off any phones or devices that are 2 3 already paired with your headset. Turn off your headset by closing the headset boom. Perform Step 2 ("Start Bluetooth Feature"), and Step 3 ("Pair"), and Step 4 ("Test and Use") to pair your headset with your second phone. > Settings > Connection > Bluetooth Link > Audio Devices. The phone lists Bluetooth devices it finds. b Select Motorola H710. c Select OK or Yes. Your headset is now connected to both phones. The last paired phone (your second phone) is now your primary phone for voice dial functionality. After you have successfully paired both phones with your headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. To reconnect your headset with your first phone (and thus be connected to both phones), follow these steps: 1 Turn on first phone. TIPS FOR USING H710 WITH TWO PHONES Use the following tips when using H710's multipoint technology: TROUBLESHOOTING My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is flashing in blue, first turn off the other device, then close and reopen the headset boom. The indicator light becomes steadily lit in blue indicating the headset is now in pairing mode. Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). Press and hold both Volume buttons and the Call button for more than 10 seconds. The indicator light flashes blue 3 times and then become steadily lit. The headset is now in pairing mode (see step 3B) to complete the pairing process. If you need more help, contact us at 1-877-MOTOBLU or visit us at www. hellomoto. com/Bluetoothsupport Incoming calls can be answered from both phones: ­ When answering a call, the idle phone is disconnected from the headset. ­ When the call ends, the idle phone is automatically reconnected to the headset. Last number redial dials the last outgoing call made from either phone. [. . . ] 2 Press and hold down the desired "volume up" button and open the boom. Keep the button pressed until the indicator light flashes blue three times. Volume Buttons Call Button European Union Directives Conformance Statement Hereby, Motorola declares that this product is in compliance with: · The essential requirements and other relevant provisions of Directive 1999/5/EC. · All other relevant EU Directives. MAKING CALLS Function Make a voice dial call (Primary phone) Make a voice dial call (Secondary phone) Action Tap the Call button and speak the name after the tone Tap the Call button and either Voume button and speak the name after the tone Tap the Call button, and hear a high-to-low tone Open the boom or tap the call button (if boom is ready open), hear the ring tone, then a low-to-high tone Press and hold either Volume button until you hear a tone End a call Product Approval Number Answer a call The above gives an example of a typical Product Approval Number. You can view your product's Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www. motorola. com/rtte. [. . . ]