User manual MOTOROLA H9 MINIBLUE HEADSET

[. . . ] For most Motorola phones (at the main menu): 1 Press M (Menu) > Settings > Connection > Before you can use your headset, you must pair (link) it with your phone. Step A - ENSURE HEADSET IS IN PAIRING MODE Power on headset by removing from charger base. The indicator light flashes to initiate easy pairing. [. . . ] For other phones, see your phone's user's guide. 4 TEST AND USE Your phone and headset are now paired and ready to make and receive calls. To make a call: USING YOUR PORTABLE CHARGER BASE The portable charger base provided with your headset can be used to cordlessly recharge your headset anywhere. Once charged, the portable charger base provides power on-the-go, extending your talk time by constantly "topping off" your headset's battery. Using the included Motorola power supply, you can charge both the portable charger base and headset at the same time. The portable base charger provides two indicator lights for charging status. See "Indicator Lights" in the reverse side of this guide for information on these indicator lights. Note: Using your PC's USB port as a power source for charging is not recommended. 1 Place the headset in your ear. The eartip should be inserted so that the headset feels comfortable and forms a seal in the ear. Note: See "Eartips and Your Headset" on the reverse side of this guide for more information on using eartips with your headset. 2 On the phone, dial the number you want to call and press SEND key on your phone. 3 If your phone and headset are successfully paired, you will hear ringing on the headset. After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. USING YOUR H9 See Features and Functions Guide on the reverse side for information on using your H9 TROUBLESHOOTING My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode. Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). If you need more help, contact us at 1-877-MOTOBLU or visit us at www. hellomoto. com/Bluetoothsupport Features and Functions Guide H9 Bluetooth® Handsfree Headset TURNING ON AND OFF To turn your headset on, press and hold the Call button until the indicator light flashes. To turn your headset off, press and hold the Call button until the indicator light flashes rapidly and then turns off. [. . . ] Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information. MAKING CALLS CONTINUED Function Toggle between two active calls Action Press and hold the Call button until you hear a medium beep Press and hold both Volume buttons until you hear a medium beep Press and hold the Call button until you hear a medium beep Tap the Call button Press and hold the Call button until you hear a low beep Tap both Volume buttons MAKING CALLS CONTINUED Function Disable or enable the indicator light Action Press and hold both Volume buttons until you hear a low beep Join a 3-way call AUDIO TONES The audio tones provide information about your headset's status. Audio Tone Single high tone when pressing Volume button Five rapid high tones repeated every 20 sec. [. . . ]