User manual MOTOROLA HIGH-DEFINITION OFF-AIR TUNER HDT101

[. . . ] User Guide TM HDT101 High-Definition Off-Air Receiver CAUTION RISK OF ELECTRIC SHOCK CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Graphical symbols and supplemental warning marking locations on bottom of terminal. WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION TO PREVENT ELECTRICAL SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. REPAIRS If you find the unit in need of repair, call Motorola Support at 1-866-668-2271 or 1-866-MOT-BCS1. EXAMPLE OF ANTENNA GROUNDING Electric service equipment Ground clamp Antenna lead in wire Antenna discharge unit (NEC Section 810-20) Grounding clamps Power service grounding electrode system (NEC Article 250, Part H) Grounding conductors (NEC Section 810-21) NEC=NATIONAL ELECTRICAL CODE IMPORTANT SAFETY INSTRUCTIONS 1 2 3 4 5 6 7 8 Read instructions All the safety and operating instructions should be read before the appliance is operated. [. . . ] You must first enter the channel number and then use the and keys to tune to the sub-channel you wish to view. If sub-channels exist within a channel, the sub-channel numbers are shown with a dash after the channel number. In the sample screenshot on page 25, channel 5 has two sub-channels, labeled 1 and 2. You cannot tune to a sub-channel using the number keys on your remote control. You must first enter the channel number and then use the and keys to tune to the sub-channel you wish to view. To quickly navigate to the channels you view most often, set those channels as Favorites. See "Selecting a Favorite Channel" on page 25. 22 Using Closed Captioning To turn closed captioning off or on: 1 Press CC on your remote control to display the Closed Captioning Settings. 2 Using the and keys, highlight CC1 to select primary closed captioning (in English) or highlight CC2 to select secondary closed captioning (in an alternate language). To turn off closed captioning, highlight Disable CC. 3 Press SELECT. Some programs may not transmit closed captioning. Advanced Closed Captioning Some programs offer advanced closed captioning. These programs will list different languages under Closed Captioning Settings. Simply use the and keys to highlight the desired language and then press SELECT. If a language is listed in the Closed Captioning Settings with ­E after it, this closed caption service will offer more expanded descriptions than regular closed captioning. If a language is listed with ­W after it, the closed caption service has been designed specifically for widescreen TVs (16:9). 23 ON-SCREEN MENU You can use the HDT101's on-screen menu to: · · · · · · Select favorite channels Set up parental controls Set the HDT101's time zone Add a channel Customize the on-screen menu and i-Banner Customize closed captioning Instructions for completing the tasks listed above, as well other on-screen menu functions, are included in this section. You can navigate the on-screen menu using the HDT101's remote control: · · · Press the menu. and arrow keys to move up and down the on-screen Press the SELECT button to select the highlighted item on the on-screen menu. Press the EXIT button to return to the main menu from a submenu or to exit the main menu. 24 Selecting Favorite Channels If there are certain channels you wish to access quickly, you can set them as favorites in the HDT101 on-screen menu. To set your favorites: 1 Press MENU on the remote control. 2 Highlight Edit Channel and press SELECT. The Password window is displayed. 3 Enter your four-digit password. If you have not yet created your own password, enter the default password: 0000. The Edit Channel window is displayed: If you wish to change your password, see "Changing Your Password" on page 32. 4 Press the favorite. and keys to select the channel you wish to set as a 5 Press the key to highlight the FAV column for that channel and press SELECT. The "favorite" icon appears in the column. 6 Press EXIT twice to exit the on-screen menu. 25 Tuning to Favorite Channels Favorite channels can be quickly accessed from the Favorite Channels List: 1 Press FAV on the remote control. [. . . ] Determine if the HDT101 is in standby mode by pressing STANDBY on the remote control. No picture Verify that all cables are connected properly (hand-tighten if necessary). If you are watching TV using your VCR, be sure your VCR is on. Verify that the TV is directed to the proper input source. Your TV may not support the current video output format. [. . . ]