User manual MOTOROLA IDEN LM3000E

[. . . ] iDEN LM 3000E Getting Started 68P81084C17-0 Welcome Congratulations on your purchase of the iDEN Advanced Feature Mobile (LM3000E) by Motorola. This manual explains all the features that are available on your mobile. The Advanced Features Mobile lets you make and receive person-to-person or group radio calls, send and receive alphanumeric Status Messages, and initiate Emergency Group Calls. The unit also supports 4. 8 Kb circuit data for FAX/modem use (when a Handset is connected with a Data Hangup Cup). [. . . ] The table below provides a description of the features available in the Feature Menu. The Feature Menu can be accessed using the MENU key at any time without interrupting radio operation. · Key The Feature Menu can be accessed by pressing the ME key on the front right of the radio. You can then select features by scrolling using the keys. To exit the Feature Menu, press , , , or . Feature Menu Table Feature Name and Description Own Radio ID Allows you to program, edit, and review your personal Radio ID. Example Display 35 Feature Name and Description Example Display Display Dimmer Allows you to set the brightness of the radio display (bright for day, dim for night). Manual Lock Locking your unit prevents unauthorized use and disables incoming and outgoing calls. Manual lock allows you to selectively lock your unit at any time. Automatic Lock This feature automatically locks your unit each time the unit is turned on. Theft Alarm When Theft Alarm is ON, you have 30 seconds to enter your Passcode. After that time, the vehicle's horn and lights come on and start flashing. This feature requires additional hardware. 36 Feature Name and Description Example Display Radio ID List Programming Allows you to add, edit, and erase the pre-programmed list of radio IDs for making Private Conversations and sending Call Alerts and Status Messages. Each radio ID can be up to five digits long and can be given an 11-character name (alias). Talkgroup List Programming Allows you to add, edit, and erase the pre-programmed list of talkgroup IDs for making Group Calls. Each talkgroup ID can be up to three digits long and can be given an 11-character name (alias). Service Area List Programming Allows you to add, edit, and erase the pre-programmed list of service areas for making Group Calls. Each service area can be up to two digits long and can be given an 11-character name (alias). Status List Programming Allows you to add, edit, and erase the pre-programmed list of status messages for sending Status Messages. Each Status Message can be up to three digits long and can be given an 11-character name (alias). 37 Feature Name and Description Example Display Speaker Volume Volume is displayed as a bar graph. Use the On/Off Power/Volume knob on the front of the radio to adjust the volume. Note: If the Speaker Volume Set Tone is set to OFF, you will not hear the speaker volume adjustment tones. Keypad Volume Allows you to adjust the keypad volume. You can silence the keypad by decreasing the volume until "SILENT" appears on the display. Keypad Volume is listed under the MENU key. Press SEL when you get to the Keypad display to use the keys to adjust the volume. Speaker Volume Set Tone Disabling this feature (OFF) will prevent speaker volume adjustment tones from being heard. When this feature is enabled (ON), a tone will be heard indicating the volume level of the speaker. 38 Feature Name and Description Example Display Changing Your Passcode The passcode is initially set to ØØØØ. This feature allows you to personalize your passcode to any four digits you select. [. . . ] Contact the vehicle manufacturer's corporate headquarters, if necessary, for specific air bag information for the vehicle make, model, and front compartment configuration involved in your communication equipment installation. 72 Cleaning Instructions Clean the external surfaces with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals which could seriously damage the unit. Avoid the use of any petroleum-based solvent cleaners. [. . . ]