User manual MOTOROLA MOTOROKR EQ7 BROCHURE

[. . . ] In some countries or regions, collection systems are set up to handle electrical and electronic waste items. Contact your regional authorities for more details. If collection systems aren't available, return unwanted mobile phones or electrical accessories to any Motorola Approved Service Centre in your region. FCC Notice to Users Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. [. . . ] The Bluetooth indicator flashes to indicate your speaker system is in discoverable mode. Place phone or music device in Bluetooth search mode. The phone or music device searches for your speaker system. Select Motorola EQ7 from search results on your phone or music device and confirm pairing following the on-screen instructions. When your speaker system successfully pairs and connects with your phone or music device, the Bluetooth indicator changes from flashing blue to steadily lit. Music playing from your connected music device source is heard on your speaker system. After successfully pairing your speaker system and Bluetooth device, you don't need to repeat these steps. For each use, ensure that your speaker system is turned ON and that your device's Bluetooth feature is ON. Some music devices will automatically attempt to play music when the EQ7 re-connects to it. 5 English Connect wirelessly to 2 devices (multipoint connection) To connect to phone and music device at the same time: 1. Pair and connect to your phone first (see section "Connect Wirelessly). Turn off your phone and your speaker system. The Bluetooth indicator flashes to indicate the speaker system is in discoverable mode. Make sure the Bluetooth feature is turned on in the device. The music device searches for your speaker system. Complete steps 5 & 6 on section "Connect Wirelessly" to pair and connect your music device and speaker system successfully. Turn your phone back on and make sure the Bluetooth feature is turned on in both the phone and music device. It should now connect to both devices. Connect with a cable To listen to your music using a wired connection, connect your music device to the Audio port on your speaker system using the included audio cable. See figure 4 on page 2 Notes: connection. 6 English Control your tunes See figure 1 on page 1 Playback controls on your speaker system can be used when listening to wireless music streaming from a Bluetooth-enabled music device that also provides remote control capabilities (AVRCP). When remote control capabilities are not supported by your music device, the EQ7 simply acts as a speaker system, and music should be controlled from your music device. * ** or Short press--play/pause music Long press--stop music Short press--skip to previous track Long press--rewind track* Short press--skip to next track Long press--fast-forward track* 9 Short or long press--decrease or increase volume** If your music player supports this feature You'll hear a tone when maximum or minimum volume is reached on your speaker system. [. . . ] To clear paired devices list in your speaker system, press and hold both Reverse and Forward buttons at the same time until speaker system resets. Power saving using battery power When using batteries during Bluetooth connection, if your speaker system is inactive (i. e. detects no audio) for over 5 minutes, it will go into power saving mode and dim the music buttons. If you have any additional questions, please call your hotline number (0870-9010-555) or visit us at www. hellomoto. com. 8 motorola. com MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. [. . . ]