User manual MOTOROLA MPT

[. . . ] For mobile PhoneTools to operate properly, please verify the following: · A PC with a Pentium® II 233 MHz computer, connected to your mobile phone (with a cable, an infrared port, or a Bluetooth adaptator). · One available USB or serial port if using a cable connection or an active Bluetooth adapter or a fully working Infared port. · Local hard drive with 20MB free space. [. . . ] When installing mobile PhoneTools from the CDRom, the installation process starts automatically. Should the installation program not start, execute the following instructions: 1. Select the Run command from the Start menu (accessible from the task bar). Select the drive that contains the CD or type D:SETUP (D: represents the CD-Rom drive). An installation wizard will guide you step-by-step through the installation process, prompting for information where needed. During the installation process the content of the CD-Rom is copied onto your hard drive and a program group is created to hold the application icons for mobile PhoneTools. After installation, the online registration wizard is automatically launched (see Online registration, page 7). The registration is necessary to benefit from the guarantee, the technical assistance, and free upgrades. Depending on the operating system, when the installation process is completed, the installation wizard asks you to restart your computer so that all system changes take effect. The mobile PhoneTools program group is then accessible from the Start menu (from the task bar) and the following icon can be added to the desktop, as a shortcut, to start the program : mobilePhoneTools 4 mobile PhoneTools - Quick Start Mobile Device installation and configuration Important!Please do not connect your mobile or your mobile device to your PC until instructed to do so by the MPT software installation wizard. Normally your software has be setup to work automatically with your mobile phone or device, so this step is automatic. However if we do not detect the connection type we will display the phone setup wizard screen: 3. Select how you will be connecting your phone to your PC. 5 mobile PhoneTools - Quick Start 4. Connect your phone to your PC, your phone will be detected and setup automatically. The application will be launched at the end of the installation process. 6 mobile PhoneTools - Quick Start Online registration To benefit from the guarantee, the BVRP Software technical assistance, and free upgrades, register online with our services. The online registration wizard is automatically launched at the end of the installation process. Simply follow the instructions displayed on the screens. Check that your Internet access is avalaible and properly set up to ensure an automatic Internet connection. If online registration could not be completed during installation, you can also register at any other time using Menu > Help > Online Registration. Uninstalling mobile PhoneTools 1. [. . . ] Press again to close the panel (see page 10. ) Press to access all the functionalities and setup options of mobile PhoneTools. Press to view online help. Press to close mobile PhoneTools. Press to minimize mobile PhoneTools and place its icon in the tray bar of your PC's desktop as shown below: Double-click here to have the mobile PhoneTools window displayed. 9 mobile PhoneTools - Quick Start mobile PhoneTools Function Panel Icon description : Launches or ends the default Internet connection. Displays the Send/Receive SMS text message window. Displays information regarding mobile phone. Note: Some of mobile PhoneTools features might not be available with your phone or device. 10 Additional information Keyboard shortcuts F1 Online help F3 Outbox F4 Inbox F5 Phonebook F6 General Setup F8 Transmission logbook F9 Reception logbook F10 Menu Websites Please visit our websites to obtain the latest information on our products and available upgrades: http://www. motorola. com http://www. bvrp. com Copyright and trademarks Copyright © Motorola, Inc. [. . . ]