User manual MOTOROLA QG-H500

[. . . ] BEFORE YOU BEGIN Start Here > > > Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions. 1 Your Headset's Battery CHARGE 2 START BLUETOOTH Feature On Your Phone TROUBLESHOOTING My phone does not find my headset. Make sure the blue light on your headset is steadily lit when your phone is searching for devices (see step 3). [. . . ] Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 USA www. hellomoto. com 1-877-MOTOBLU 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) Guide Number: 6809494A56-A If you need more help, contact us at 1-877-MOTOBLU. 3 Your Headset PAIR Your Phone Step B - SET THE PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones: (Menu) 1 Select M( > Settings > Connection > PAIR 4 TEST AND USE USING YOUR H500 See Features and Functions Guide on the reverse side of this guide for information on using your H500. Step A - PUT HEADSET IN PAIRING MODE Before you can use your headset, you must pair (link) it with your phone. Call Button Blue Indicator Light Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call: Bluetooth Link > Handsfree > Look for Devices. The phone lists all Bluetooth devices it finds. Note: Passkey cannot be changed from 0000. 1 Place the headset over your ear. See "Wearing the Headset" on the reverse side of this guide. to call and press the Send key. 1 With the headset power off, press and hold the Call button for 6 to 10 seconds until the blue indicator light turns on and remains steadily lit. (The light will flash while you hold the Call button. ) If the indicator light is flashing or does not remain steadily lit, turn off the headset and repeat step 1. 2 3 Press OK or Yes to pair (link) the handsfree 4 2 On your phone, dial the number you want 3 If your phone and headset are successfully paired, you will hear ringing on the headset. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. All other product or service names are the property of their respective owners. 2005. 2 When your headset is successfully paired with your phone, the blue indicator light changes from steadily lit to flashing. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. After you have successfully paired your phone and headset, you do not need to repeat these initial setup steps each time you use the headset. Note: To turn off headset, see "Turning On and Off" on the reverse side of this guide. Features and Functions Guide H500 Bluetooth® Handsfree Headset TURNING ON AND OFF To turn your headset on, press and hold the Call button until the indicator light flashes. To turn your headset off, press and hold the Call button until the indicator light flashes rapidly and then turns off. To conserve battery power, turn off your headset when you don't plan to use it for a while. WEARING THE HEADSET 1 Open the earhook. [. . . ] Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information. Note: Some features are phone/network dependent. Note: After 5 minutes of inactivity, the light stops flashing to conserve power, but the headset remains in standby mode. [. . . ]