User manual MOTOROLA QG-H700

[. . . ] For most Motorola phones (at the main menu): (Menu) 1 Press M( > Settings > Connection > 1 Plug the Motorola charger into the end of the headset. The indicator light turns red when the battery is charging. It may take up to 1 minute for the indicator light to turn on. [. . . ] Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www. hellomoto. com 1-877-MOTOBLU 1-888-390-6456 (TTY/TDD United States for hearing impaired) Guide Number: 6809499A88-O 3 PAIR CONTINUED Your Phone 4 TEST AND USE USING YOUR H700 See Features and Functions Guide on the reverse side for information on using your H700. TROUBLESHOOTING My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is flashing in blue, turn off the other device and wait for 10 seconds. The indicator light becomes steadily lit in purple indicating the headset is now in pairing mode. Make sure the indicator light on your headset is on (lit in purple) and steady when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). If you need more help, contact us at 1-877-MOTOBLU or visit us at www. hellomoto. com/bluetooth and click Support Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones: (Menu) 1 On your Motorola phone, press M( > Your phone and headset are now paired and ready to make and receive calls. To make a call: 1 Open the headset boom and place the headset over your ear. Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. 2 On the phone, dial the number you want to call and press SEND key on your phone. The phone lists Bluetooth devices it finds. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. All other product or service names are the property of their respective owners. 3 Select OK or Yes to pair your headset with 4 5 your phone. Enter the passkey: 0000 Select OK. 3 If your phone and headset are successfully After you have successfully paired your phone and headset, you don't need to repeat these steps. [. . . ] 4 Hook the bottom of the Multi-Color Indicator Light earhook onto the lower hinge pin, then lift and pull the top of the earhook over the upper hinge pin. Volume Buttons Hinge Pin Call Button MAKING CALLS Function Make a voice dial call End a call Receive a call Action Tap the Call button and speak the name after the tone Tap the Call button Open headset boom or tap the Call button (if boom is already open) Press and hold the Call button until you hear a beep Press and hold the Call button until you hear a beep MAKING CALLS CONTINUED Function Answer a second incoming call Toggle between two active calls Join a 3-way call Put an active call on hold or resume a call on hold Transfer a call from the phone to the headset Disable the indicator light Mute or unmute a call Action Press and hold the Call button (places first call on hold) Press and hold the Call button Press and hold both Volume buttons Press and hold the Call button until you hear a beep Open headset boom Press and hold both Volume buttons for 3 to 4 seconds Tap both Volume buttons With the Charger Plugged In Indicator Light Headset Status Red (steady) Charging (less than 80% charged) Yellow (steady) Charging (more than 80% charged) Green (steady) Charging complete With No Charger Plugged In Headset Status Power off Pairing mode/ Volume button orientation Red Battery low Blue (10 rapid flashes) Pairing successful Blue (slow pulse) Connected (on a call) Blue (quick flash) Standby (not on call) Note: After 5 minutes of inactivity, the light stops flashing to conserve power, but the headset remains in standby mode. INDICATOR LIGHTS The audio tones provide information about your headset status. Audio Ton e Single high tone when pressing Volume button Five rapid high tones repeated every 60 sec. No audio indications; deteriorating quality Ring tone Single high tone Single low tone Dual high/low tone Single high tone Low to high tone Two ascending tones Two descending tones Headset Status Volume at minimum or maximum Low battery Out of range Incoming call Pairing confirmation Voice activation Voice tag not recognized End call Phone network not available Mute enabled Mute disabled AUDIO TONES Reject a call Redial last call Indicator Light Off Purple (steady) Note: Your H700 supports both Handsfree and Headset Profiles. [. . . ]