User manual MOTOROLA QG-HS815

[. . . ] Step A - PUT THE HEADSET IN PAIRING MODE Take a moment before you get started to familiarize yourself with your new HS815 Headset. Earhook Charging Earhook Charging Port Call Button Port Call Button Indicator Light LED Indicator Bluetooth Link > Setup. 1 Plug the Motorola charger into the end of the headset with the release tab facing down. The indicator light turns on when the battery is charging. [. . . ] Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. All other product or service names are the property of their respective owners. 2005. 3 1 PAIR CONTINUED Your Phone 4 TEST AND USE USING YOUR HS815 See Features and Functions Guide on the reverse side for information on using your HS815. TROUBLESHOOTING My phone doesn't find my headset. Make sure the indicator light on your headset is on and steady when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). If you need more help, contact us at 1- 877-MOTOBLU. FOR DETAILS ABOUT YOUR HANDSFREE DEVICE See the user's guide or visit us at www. hellomoto. com/bluetooth and click Support. Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones: On your Motorola phone, press M( (Menu) > Your phone and headset are now paired and ready to make and receive calls. To make a call: Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. 1 Place the headset over your ear. 2 On your phone, dial the number you want to call and press the SEND key. The phone lists Bluetooth devices it finds. 2 Select Motorola HS815. 3 Select OK or Yes to pair your headset with 4 5 your phone. Enter the passkey: 0000 Select OK. 3 If your phone and headset are successfully After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. To save battery power, turn OFF the headset when you don't use it for an extended time. paired, you will hear ringing on the headset. When your headset successfully pairs with your phone, the indicator light changes from steadily lit to flashing. Note: These steps are for most Motorola phones. [. . . ] With the Charger Plugged In Indicator Light Headset Status On (steady) Off Indicator Light Off On (steady) 10 rapid flashes Slow pulse Quick flash Charging Charging complete With No Charger Plugged In Headset Status Power off Pairing mode Pairing successful Connected (on a call) Standby (not on call) INDICATOR LIGHTS AUDIO TONES The audio tones provide information about your headset status. Audio Tone Single high tone when pressing Volume button Five rapid high tones repeated every 60 sec. No audio indications; deteriorating audio quality Ring tone Single high tone Single low tone Dual high/low tone Low to high tone Headset Status Volume minimum or maximum reached Low battery Out of range Incoming call Pairing confirmation or End call Voice activation Voice tag not recognized Phone network not available End a call Redial a number Receive a call Reject a call Note: Your HS815 supports both Handsfree and Headset Profiles. [. . . ]