User manual MOTOROLA QG-HS850

[. . . ] BEFORE YOU BEGIN Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions. 1 Your Headset's Battery CHARGE 2 START BLUETOOTH FEATURE 3 PAIR Your Headset HS850 Bluetooth® Handsfree Headset Get Connected in 4 Quick Steps 1 - CHARGE 2 - START BLUETOOTH FEATURE 3 - PAIR 4 - TEST AND USE For help, contact us at 1- 877-MOTOBLU or visit us at www. hellomoto. com Take a moment before you get started to familiarize yourself with your new HS850 Headset. Release tab down Boom Your Phone Your phone's Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone. [. . . ] For other phones, see your phone's user's guide. Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 USA www. hellomoto. com 1-877-MOTOBLU 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) Guide Number: 6809492A69-A 3 PAIR CONTINUED Your Phone 4 TEST AND USE QUICK TIPS To turn on the headset, open the headset boom. The indicator light blinks when the power is on. To answer or end a call, press the Call E button on the headset. To adjust the volume, press the Volume buttons on the headset. NOTE: To set volume button orientation for right or left ear, with the boom closed, first press and hold the Call E button until the indicator light is lit. Then press the Volume button to be used to increase volume. The indicator light flashes to indicate success. To turn off the headset, close the headset boom. The indicator light will stop flashing. TROUBLESHOOTING My phone doesn't find my headset. Make sure the indicator light on your headset is on and steady when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). If you need more help, contact us at 1- 877-MOTOBLU. FOR DETAILS ABOUT YOUR HANDSFREE DEVICE See the user's guide or visit us at www. hellomoto. com/bluetooth and click Support. Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones: (Menu) 1 On your Motorola phone, press M( > Your phone and headset are now paired and ready to make and receive calls. [. . . ] For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. To save battery power, turn OFF the headset when you don't use it for an extended time. paired, you will hear ringing on the headset. When your headset successfully pairs with your phone, the indicator light changes from steadily lit to flashing. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. [. . . ]