User manual MOTOROLA QIP2500 BROCHURE

[. . . ] User Guide QIP2500 Series Set-Top Terminal CAUTION RISK OF ELECTRIC SHOCK CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Graphical symbols and supplemental warning marking locations on bottom of terminal. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION TO PREVENT ELECTRICAL SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This installation should be made by a qualified service person and should conform to all local codes. [. . . ] Reverse engineering or disassembly is prohibited. Services may vary based on local offerings and promotions. 2 QIP2500 User Guide INTRODUCTION Front Panel The QIP2500 front panel has 11 keys and an LED display. Use the keys to perform basic functions, such as changing channels and turning the set-top on and off. Display the current channel or time of day on the LED display by changing the default settings in the electronic program guide. Item 1 2 3 4 5 6 7 8 9 10 11 Description CURSOR ­ Moves the cursor in menus and electronic program guide (EPG) screens MESSAGES ­ Lights to indicate that a message is present ON ­ Lights when the unit is turned on DISPLAY ­ Displays current channel number or time of day REMOTE ­ Flashes when a signal is received from the remote control CHANNEL ­ Changes the channel up and down SELECT ­ Selects menu options and tunes channels from the EPG POWER ­ Turns the QIP2500 on and off MENU ­ Displays the Main Menu INFO ­ Displays current channel and program information GUIDE ­Displays the electronic program guide (EPG) 3 INTRODUCTION Rear Panel Before you begin installing the QIP2500, take a moment to become familiar with the rear panel connections. These connectors are for home entertainment cabling. An AC power cord connects the QIP2500 to an electrical power outlet. For cabling diagrams, see "Connecting Your QIP2500. " 4 QIP2500 User Guide INTRODUCTION Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Description RF IN ­ Connects to and receives a cable signal from your service provider TO TV/VCR ­ Connects to a TV or VCR DIGITAL AUDIO OPTICAL ­ Connects to a digital A/V receiver (optional) AUDIO OUT TO TV ­ RCA stereo outputs (R/L) that connect to your TV AUDIO OUT TO VCR ­ RCA stereo outputs (R/L) that connect to your VCR DATA ­ Serial data interface (check with your service provider before connecting any device to this port) SMART CARD ­ Supports a Smart Card device (currently not enabled) AC POWER ­ A two-plug AC power inlet used to power the QIP2500 (bottom) and another device (top), such as a TV or VCR S-VIDEO ­ Connects to S-Video input of TV or VCR VIDEO ­ RCA video output that connect to a TV, VCR, or other device DIGITAL AUDIO COAX ­ Connects to a digital A/V (audio/video) receiver USB ­ Connects to select USB 1. 1 devices (check with your service provider before connecting any device to this port) IR ­ Connects the optional Infrared (IR) blaster attachment TV PASS CARD ­ For future use 5 USING THE REMOTE CONTROL ­ EXAMPLE ONLY Use a remote control to operate the QIP2500, TV, and VCR. Your remote control is provided by your local service provider and may be different from the example shown here. The remote control must be programmed for use. If your service provider has not programmed your remote control, refer to the remote control instruction guide supplied by your service provider for setup and operation instructions. 6 QIP2500 User Guide BASIC OPERATION Turning Power On and Off Press POWER on the front panel to turn the set-top on or off. When using the remote control, be sure you press CABLE before pressing POWER. Changing Channels You can change channels in two ways: · or on the front panel of the set-top, or Press CHANNEL press CHANNEL + or - on the remote control to step through the channel selection. Enter the number of the channel you wish to view using the number keys on the remote control. · Adjusting the Volume Press VOLUME + or ­ on the remote control to adjust the volume. When you adjust the volume, the volume scale is displayed on the screen. Press MUTE on the remote control to turn the sound off and on again. For best audio quality, use the remote control to set the set-top to approximately ¾ of the maximum volume level and then adjust the audio levels on external devices, such as your TV or A/V Receiver. Electronic Program Guide The electronic program guide (EPG) displays information about TV programs and enables you to access features such as Parental Control or Pay-Per-View. EPGs can vary in look and feel, depending on your service provider. Refer to the EPG instruction manual supplied by your service provider for detailed instructions. Audio Output Modes The QIP2500 includes utilities that enable you to select and adjust its DIGITAL AUDIO (coaxial or optical) or AUDIO OUT (RCA-style) outputs. If your EPG takes advantage of these utilities, it provides menu choices to select and optimize the audio output and compression modes. For more information about audio output mode configuration, refer to your EPG user manual. 7 AUDIO/VIDEO CONNECTIONS Before you begin to install your QIP2500, review the following guidelines: · For basic cable connections, use 75-ohm coaxial cables equipped with F-type connectors. You can find coaxial cables in your local electronics store. For audio or video outputs, use cables equipped with RCA-type connectors. For the digital audio optical output, use a Toslink cable. Disconnect power from the QIP2500 before connecting or changing cable connections. · · · Do not place anything on top of the QIP2500, especially other home video components. NOTE To prevent overheating, make sure the set-top has adequate ventilation. [. . . ] Unplug the set-top from the AC outlet, plug it back in, and then press the POWER button. Press the POWER button on the set-top front panel instead of the remote control. The batteries in the remote control may be depleted. The remote control does not work Press CABLE on the remote control to ensure the remote control is in CABLE mode. Be sure there are no obstructions between the remote control and the set-top. [. . . ]