User manual MOTOROLA SURFBOARD CABLE MODEM SB5102

[. . . ] Title SB5102 Cable Modem User Guide Click your selection (there is a complete Contents on page vii): Introduction Introduces your SB5102 cable modem and the controls on the Front Panel and Rear Panel. Motorola SB5102 Cable Modem Before You Begin Lists the items needed to install your SB5102 cable modem and describes Precautions, Signing Up for Service, and Computer System Requirements. Installation and Configuration Overview Provides an overview and links for cabling and configuring your SB5102 cable modem. Troubleshooting Provides suggestions to fix common problems. Contact Us Provides contact information. Frequently Asked Questions Provides answers to common questions about the SB5102 cable modem. SAFETY AND REGULATORY INFORMATION WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS DEVICE TO RAIN OR MOISTURE. THE DEVICE SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE DEVICE. CAUTION: TO ENSURE REGULATORY AND SAFETY COMPLIANCE, USE ONLY THE PROVIDED POWER AND INTERFACE CABLES. TO PREVENT ELECTRICAL SHOCK, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. [. . . ] If TCP/IP is not installed for the adapter, continue with step 6. To access an electronic version of this guide please visit: http://broadband. motorola. com/consumers/support Although your SB5102 cable modem model number may be different than in the images in this guide, the procedure is the same. SB5102 Cable Modem User Guide 12 Introduction Before You Begin Installation & Configuration Troubleshooting FAQ Glossary License Configuring TCP/IP in Windows 98, Windows 98 SE, or Windows Me, continued 6 7 8 9 Select the adapter to be used for the SB5102 cable modem connection and then click Add. Double-click the Protocol option on Select Network Component Type window. Click Microsoft in the Manufacturers section and click TCP/IP in the Network Protocol section of Select Network Protocol window. Click OK. SB5102 Cable Modem User Guide 13 Introduction Before You Begin Installation & Configuration Troubleshooting FAQ Glossary License Configuring TCP/IP in Windows 98, Windows 98 SE, or Windows Me, continued 10 Click TCP/IP on the Network window. If there is more than one TCP/IP entry, choose the one for the Ethernet card connected to the cable modem. 11 Click Properties. 13 Click Obtain an IP address automatically. 14 Click OK to accept the TCP/IP settings. 15 Click OK to close the Network window. 16 Click OK when prompted to restart your computer and click OK again. When you complete TCP/IP configuration, go to "Verifying the IP Address in Windows 98, Windows 98 SE, or Windows Me" on page 26. SB5102 Cable Modem User Guide 14 Introduction Before You Begin Installation & Configuration Troubleshooting FAQ Glossary License Configuring TCP/IP in Windows 2000 1 2 3 On the Windows Desktop, click Start. Select Settings and then Control Panel from the pop-up menus. Double-click the Network and Dial-up Connections icon on the Control Panel window. In the steps that follow, a connection number such as 1, 2, or 3 is a reference displayed on PCs with multiple network interfaces. PCs having only one network interface may display only the label Local Area Connection. 4 On the Network and Dial-up Connections window, double-click Local Area Connection number. The value of number varies from system to system. The Local Area Connection number Status window is displayed. SB5102 Cable Modem User Guide 15 Introduction Before You Begin Installation & Configuration Troubleshooting FAQ Glossary License Configuring TCP/IP in Windows 2000, continued 5 6 Click Properties. Information similar to the lower window is displayed. If Internet Protocol (TCP/IP) is in the list of components, TCP/IP is installed. If Internet Protocol (TCP/IP) is not in the list, click Install. The Select Network Component Type window is displayed. Continue with step 7. SB5102 Cable Modem User Guide 16 Introduction Before You Begin Installation & Configuration Troubleshooting FAQ Glossary License Configuring TCP/IP in Windows 2000, continued 7 8 9 Click Protocol on the Select Network Component Type window and click Add. The Select Network Protocol window is displayed. Click Internet Protocol (TCP/IP) in the Network Protocol section on the Select Network Protocol window. [. . . ] Motorola licenses the Software to the original customer and to any subsequent licensee for personal use only on the terms of this License. Motorola and its 3rd party licensors retain the ownership of the Software. You may: USE the Software only in connection with the operation of the Product. TRANSFER the Software (including all component parts and printed materials) permanently to another person, but only if the person agrees to accept all of the terms of this License. [. . . ]