User manual MOTOROLA XTR446

[. . . ] Fm Page 2 Monday, August 14, 2006 3:38 PM English PRODUCT SAFETY AND RF EXPOSURE FOR PORTABLE TWO-WAY RADIOS Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF C a u t i o n Exposure booklet enclosed with your radio. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet to ensure compliance with RF energy exposure limits. Charger Safety Instructions Before using the battery charger, read all instructions and cautionary markings on: • the battery • the battery charger, and • the radio using the battery. Caution 2 To reduce the risk of injury, only charge the Motorola approved rechargeable battery for this product. [. . . ] If you hear static, the channel is clear for use. Obstacles that block the signal path may affect the strength of the incoming signal. Both the static noise and any signals will be heard. To turn the monitor off, press MON, the longer be displayed. Use the VOL/CH side button (+) or (-) to increase or decrease the displayed channel number. Press and hold the MEM button for two seconds. The MEM icon flashes and the memory number is also displayed. Use the VOL/CH side button (+) or (-) to increase or decrease the displayed memory number. The channel number is now displayed flashing. Use the VOL/CH side button (+) or (-) to increase or decrease the displayed channel number. Use the VOL/CH side button (+) or (-) to increase or decrease the displayed code number. Interference Eliminator Code Interference eliminator codes help minimize interference by providing you with a choice of code combinations. You can specify a different code for each channel. Each of the channels, 1-8, may have any one of the codes, 00-38, selected. Code 00 indicates no code selected and your radio can receive a signal regardless of the code setting on the transmitting radio. Note: Handsets with different interference eliminator codes will not be able to communicate with each other. Use the VOL/CH side button (+) or (-) to increase or decrease the displayed code number. Press SEL/ 4 times to confirm the new code. To use a channel using channel memory: 1. The MEM icon and the memory number appears on the display. Use the VOL/CH side button (+) or (-) to select the memory number. Fm Page 8 Monday, August 14, 2006 3:38 PM Scan English The scan facility allows you to easily scan all 8 channels. [. . . ] The warranty will not apply if the type or serial numbers on the product have been altered, deleted, removed, or made illegible. What Is Not Covered By The Warranty • Defects or damage resulting from use of the Product in other than its normal and customary manner or by not following the instructions in this user manual. • Defects or damage from misuse , accident or neglect. € Defects of damage from improper testing, operation, maintenance, adjustment, or any alteration or modification of any kind. [. . . ]