User manual MOULINEX DAE 201

[. . . ] - Unplug your appliance as soon as you have finished using it and when you are cleaning it or in the event of a power failure. - Do not use your appliance if it is not working correctly or if it has been damaged. If this happens, please contact an approved service centre (see list in the service booklet). - If the power supply cord is damaged, it must be replaced by the manufacturer, their after-sales service or a person with similar qualification to avoid any danger. [. . . ] - Any intervention other than cleaning and normal maintenance by the customer must be carried out by an approved service centre. - Never place the appliance, the power cord or the plug in water or in any other liquid. - Never allow the power cord to hang down within reach of children. - The power cord must never be close to or in contact with the hot parts of your appliance, close to a source of heat or resting on a sharp edge. - If the power cord or the plug are damaged, do not use the appliance. To avoid any risk, these must be replaced by an approved service centre (see list in the service booklet). - For your own safety, you should use only the accessories and spare parts which are suitable for your appliance. - All appliances are subject to strict quality control. Practical user tests are performed with appliances selected at random, which explains any slight signs of use. - Do not let long hair, scarves, ties, etc. - Never place the motor unit in water or under running water. - The plastic base of the glass jug (d2) cannot be removed. - Over time the strong coloured natural juices from food such as carrots and beetroot may stain the plastic parts of your appliance - this is normal. - This parts may be cleaned by soaking them in mild bleach (non abrasive) straight after use. w h a t t o d o i f yo u r a p p l i a n c e d o e s n o t wo r k ?- Check the electrical connection and/or that the blender jug is correctly positioned. - If your appliance still does not work, please contact an approved service centre. 8 - Dampen the seal of the blade unit (d3). - Place the blade unit (d3) in the jug (d2) and fix it in position by turning until it locks (1). - Check that the jug is correctly locked onto the blade unit. [. . . ] - Make certain the markings M and L located under the blade unit are set opposite each other M - Position the blender jug (d) on the motor unit (a) (2). - Put all the ingredients into the jug without going over the maximum level (1, 2 l). For a smoother mixture, put the liquid ingredients in first and run the blender for a moment before putting in the solid ingredients. - Place the lid (d1) on the jug and lock it in position (3). [. . . ]