User manual MOULINEX FG410E

[. . . ] if this occurs , contact an authorised service centre. € All interventions other than cleaning and everyday maintenance by the customer must be performed by an authorised service centre. € Do not use the appliance if the power cord or plug is damaged. The power cord must be replaced by an authorised centre to prevent any danger. [. . . ] Run the coffee maker for the first time without coffee, rinsing the circuit with 1 litre of water. MAKING COFFEE (Follow illustrations 1 to 8) • Plug the coffee maker into a main socket with the same voltage as that indicated on the rating plate of the appliance. € Fill the jug with tap water then pour the water into the tank. The marks on the tank show the volume of water required for the number of cups desired. € Fit a coffee filter (filter paper n°4 or permanent filter) into the filter holder. Add one tablespoonful of ground coffee for each cup. If you prefer your coffee slightly stronger or weaker, adjust the quantity of coffee to suit your taste. € Fit the filter holder onto its support and close the lid. The "ON" indicator light shows that the machine is operating. € If you want to serve a cup of coffee before the end of the cycle, simply remove the jug from the heat plate. the coffee will stop flowing automatically. Return the jug to the plate quickly so that the coffee may continue flowing. € At the end of a cycle, wait for around one minute until the water in the filter stops flowing into the jug. We recommend leaving the lid on the jug so that it is easier to use and so that the coffee stays at the right temperature for longer. € To keep the coffee hot, place the jug on the hot plate after serving the coffee. the hot plate automatically 7 Moulinex CM931-0827999. Qxd:-0827999 28/03/08 15:00 Page 8 GB • • stays at the ideal temperature as long as the coffee machine is switched on. Switch off when the jug is empty or when the appliance is not in use. If you want to prepare another coffee, switch off the appliance and wait for 10 minutes so that the heating elements can cool down. Important : if you do not let the appliance cool down between two uses, the water in the tank may become too hot and a jet of steam may come out, causing burns. [. . . ] The water flow-through time is too long or makes too much noise : - descale your coffee maker. If your appliance still doesn’t work please contact an authorised service centre. € • Environment protection first Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point. [. . . ]