User manual MOULINEX FP 658D

[. . . ] Your appliance is designed solely for domestic use within the home. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply. - This appliance is not intended to be used by persons (including children), with reduced or impaired physical, mental or sensory capacities, or persons lacking appropriate knowledge or experience, unless a person responsible for their safety provides either supervision or appropriate instructions concerning use of the appliance prior to its use. - Children should be supervised to ensure that they do not play with the appliance. [. . . ] - Never use the blender jug with dry products only (hazelnuts, almonds, peanuts, sugar etc. - Always place the liquid ingredients in the jug before adding the solid ingredients, taking care to avoid exceeding the following maximum levels: - 1 litre for thick mixtures. - To add ingredients during blending, remove the measuring cap (h1) from the lid and pour in the ingredients through the opening. Tips: - If any ingredients adhere to the sides of the blender jug, stop and unplug the appliance. Remove the blender jug assembly from the motor unit. Dislodge the ingredients using the spatula (l). Never put your hands or fingers in the blender jug or near to the blades. - Be careful when emptying the jug, as the blades are extremely sharp. You can: - prepare finely blended soups, thick creamy soups, fruit puree, milk shakes, cocktails, etc. 2 To prepare soya milk, fruit juice, cocktails without pips or skin, you can use the juice filter (h5). Place the filter (h5) in the blender jug (h3) with the metal grills at the bottom, taking care to ensure that filter slots are placed on the inner ribs of the jug. Next insert the screw (k5) (long axis first) into the body. - Fit the cutter (k6) on the short shaft, ensuring the sharp edges are facing outwards. - Place your chosen grille (k7-1 or k7-2) on the cutter, fitting the lugs into the corresponding notches on the head (k3). - Tighten the nut (k8) firmly on the body (k3) in a clockwise direction, avoiding over-tightening. The shaft should be tight-fitting and not pivot or rotate. If this is not the case, then repeat the preceding steps. - Clip the food guide (k4) under the mincer head (k3). 3 Fitting the mincer head to the appliance - With the appliance switched off and unplugged, join the mincer head (k), with its feeder tube tilted to the right, to the adapter. Push the mincer head as far as it will go onto the adapter (j). - Bring the feeder tube back up to a vertical position until it locks in to place. The mincer head (k) will lock automatically onto the adapter (j) as soon as it is switched on. [. . . ] Place all the ingredients in the bowl with the chopping blade (d) or the dough blade (e). Start the appliance on speed 2 and continue mixing for 2 minutes. Place the mixture in a floured and buttered tin and cook for about 50 minutes at oven to 180 C. serve warm or cold with compote or marmalade. [. . . ]