User manual MOULINEX HM 6121

[. . . ] To avoid all danger, these parts must be replaced by an approved service centre (see list in the service booklet). € Any maintenance other than routine cleaning and upkeep by customers must be carried out by an approved service centre. € Do not immerse the appliance, cord or plug in liquid. € The power cord must be kept out of the reach of children and must not be placed near or come into contact with the hot parts of the appliance, sources of heat or sharp corners. [. . . ] € Using with the base (g): (depending on model) • Check that the appliance is unplugged, that the speed control (a2) is set to "0" and that there is no blender shaft. € Insert the rods of each beater (c) or kneader (e) into the corresponding holes and lock into place. The beaters and kneaders have a specific shape. The kneader or beater with the metal collar (f) should be positioned to the left, in the biggest hole (Fig. € Place the base (g) on the worktop: - To raise the arm, unlock by pressing the button (i) (Fig. - Press the button (i) to unlock the arm and lower it (Fig. - Place the mixer fitted with the kneaders or beaters on the hinged arm until you hear it click into place (Fig. € Connect the appliance: - Your appliance has 5 speed levels MIXER FUNCTION WITH BEATERS OR KNEADERS: • Manual use: • Check that the appliance is unplugged, that the speed control (a2) is set to "0" and that there is neither blender shaft, nor minichopper nor blender connected to the back of the appliance. € Insert the rods of each beater (b) or kneader (d) into the corresponding holes and lock into place. The beaters and kneaders have a specific shape. The kneader or beater equipped with the metal collar (f) should be positioned to the left into the biggest hole (Fig. - Place the blade (n2) on the shaft of the bowl (n1). - Place the food in the bowl (n1) and then place the reducer (n3). € Check that the appliance is unplugged, that the speed control (a2) is set to "0" and that the beaters or kneaders are no longer on the appliance. - Lift the panel at the back of the appliance and place the appliance on the reducer (n3) of 14 the mini-chopper. - Connect the appliance and start using the speed control (a2), (Fig. 2), initially at speed 1 then 2, 3, 4, 5. Use the Turbo button (a2) if the recipe requires more power. - Once the preparation is finished, stop the appliance and disconnect it. - Remove the appliance and then the reducer (n3). - Remove the blade (n2) holding it by the plastic part. 800ML BLENDER BOWL FUNCTION (DEPENDING ON MODEL) - Place the bowl (o1) on the stabiliser base (q). [. . . ] € Blades are very sharp, ensure care is taken when placing and removing the blades from the dishwasher. € Clean the base (g), the reducer of the mini-chopper (n3), the reducer of the blender (o4), the appliance body (a) only with a wet sponge and dry thoroughly. € Never wash the motor unit in the dishwasher. • Do not use scouring pads or objects containing metal parts. [. . . ]