User manual MOULINEX ID 2525

[. . . ] Children must be supervised to ensure that they do not play with the appliance. The voltage of your electrical installation must correspond to that of the iron (220V-240V). Connecting to the wrong voltage may cause irreversible damage to the iron and will invalidate the guarantee. [. . . ] Connecting to the wrong voltage may cause irreversible damage to the iron and will invalidate the guarantee. €¢ This iron must always be plugged into an earthed socket. If using a mains extension lead, ensure that it is correctly rated (10 A), with an earth connection. €¢ If the electrical cord becomes damaged, it must be immediately replaced by an Approved Service Centre to avoid any danger. €¢ The appliance should not be used if it has fallen, if it has obvious damage, if it leaks or has functional anomalies. Never dismantle your appliance : have it inspected by an Approved Service Centre, so as to avoid any danger. • Never immerse your iron in water !€¢ Do not unplug your appliance by pulling on the cord. €¢ When ironing fabrics with mixed fibres, set the ironing temperature for the most delicate fibre. For delicate fabrics we recommend testing the fabric first on an inconspicious place eg (inside the hem). It is normal for the indicator light to switch on and off during ironing. If you turn down the thermostat, wait until the thermostat light comes back on before beginning to iron again. PT MS Storage and Maintenance Store your iron • Unplug the iron. €¢ Wait until the soleplate cools down and Wind the cord around the heel of the iron. €¢ Store the cold iron on its heel. Always set your iron on its heel, in order to avoid domage or scratching to the soleplate. [. . . ] €¢ Wait until the soleplate cools down and Wind the cord around the heel of the iron. €¢ Store the cold iron on its heel. Always set your iron on its heel, in order to avoid domage or scratching to the soleplate. [. . . ]