User manual MOULINEX IFU ODACIO DFC456

[. . . ] 5 7 20/07/04, 16:58 Thank you for choosing a product from the Moulinex range. This product is intended exclusively for preparing food. Description A A1 A2 A3 A4 A5 A6 B B1 B2 B3 B4 C D D1 D2 E E1 E2 Motor unit liquidiser drive cover liquidiser drive bowl and accessory drive release button for Liquidiser drive cover (A1) and for accessory fitted on liquidiser drive electronic speed selector, settings 1 to 5 Start / Stop / Vari Pulse (intermittent operation) switch Bowl assembly pusher with measuring section lid with feeder tube bowl B3a bowl drive B3b nut detachable handle B4a handle release button Spindle Blades metal blade plastic kneading blade Grating/Slicing discs disc holder 4 discs: . Thick slicing (H) Whisk whisk drive whisk Emulsifying disc Citrus press cone filter basket short spindle Liquidiser measuring cup lid jug detachable handle I4a handle release button Juice extractor pusher lid lid seal filter band 14 J5 K K1 K2 L L1 L2 M M1 M2 N O filter holder Mini-chopper lid bowl “Maxipress” blade unit 2 grids Grinder lid bowl Spatula Storage basket for aaccessories Safety recommendations - Always read the instructions for use carefully before using your appliance for the first time. [. . . ] 15 Odacio DFC4-5-6_gb modif 15 20/07/04, 16:55 - Slide the metal blade (D1) or the plastic kneading blade (D2) onto the spindle (C), down to the bottom of the bowl. - Close the liquidiser drive cover (A1). To unlock the blades (D) from the spindle (C): - Place the bowl assembly on a stable worktop. - Turn the spindle (C) clockwise, holding the blade (D) by its upper section. FITTING THE ACCESSORIES Press the release button (A4) to open the liquidiser drive cover (A1). - Fit the bowl (B3) on the bowl and accessory drive (A3). - Fit the required disc (E2) on to the disc holder (E1). - Fit the spindle (C) on the drive (B3a), then the disc holder (E1) on to the spindle (C). - Close the liquidiser drive cover (A1). USAGE AND PRACTICAL TIPS Blending - Select a speed between 3 and 5 (A5) and turn the switch (A6) to position “1” to start the appliance. you can blend up to 1 litre of soup or stewed fruit in 20 sec. Chopping - Select speed 5 (A5) and turn the switch (A6) to position “1” to start the appliance or, for better control over the chopping, use the “Vari Pulse” position (A6). Kneading/Mixing - Select speed 5 (A5) and turn the switch (A6) to position “1” to start the appliance. - When kneading, stop the appliance as soon as the pastry starts to form a ball. 3 GRATING/SLICING USAGE AND PRACTICAL TIPS - Push the food through the feeder tube using the pusher (B1). - For grating, select a speed between 3 and 5 (A5) and turn the switch (A6) to position “1”. - For slicing, select speed 2 (A5) and turn the switch (A6) to position “1”. The slicing/grating discs can (depending on model): . FITTING THE ACCESSORIES Press the release button (A4) to open the liquidiser drive cover (A1). - Fit the bowl (B3) on the bowl and accessory drive (A3). 4 a To use the balloon whisk (F): - fit it on to the bowl drive (B3a). 4 b To use the emulsifying disc (G): - fit the spindle (C) on to the bowl drive (B3a). [. . . ] 8 FINELY CHOPPING SMALL QUANTITIES LIQUIDISER ACCESSORY USED - Liquidiser jug (I) FITTING THE ACCESSORY Press the release button (A4) to open the liquidiser drive cover (A1). - Place the ingredients in the liquidiser jug (I3) and lock the tab on the lid (I2) under the handle. - Fit the liquidiser jug (I) on the liquidiser drive (A2) (audible click). If the lid is not fitted or incorrectly fitted on the jug, the appliance will not start. [. . . ]