User manual MOULINEX LM 3011

[. . . ] The power cord must be kept out of the reach of children and must not be placed near or come into contact with the hot parts of the appliance, sources of heat or sharp corners. €¢ For your safety, only use accessories and spare parts that correspond to your appliance, sold by an approved service centre. 7 Notice_0828485:Mise en page 1 4/06/10 12:06 Page 8 • The blades are very sharp: handle them with caution to avoid injury. €¢ Never use the blender or its accessories without ingredients and never pour boiling liquids into the jug. [. . . ] €¢ Make sure all the packaging has been removed before operating the appliance. €¢ Important note: Turn the speed selector (B) to “0” before placing the blender jug or accessories on the motor unit. €¢ The appliance starts only if the jug or accessory is correctly positioned and locked on its body. €¢ Do not operate the blender if the lid is not in place. USING YOUR APPLIANCE • Place the assembly (c1+c2) on the base of the jug (c3). Lock it by rotating the blade unit through a quarter turn in the anticlockwise direction. €¢ Introduce the ingredients into the assembled jug without exceeding • Moisten the gasket (c2) and position it correctly on the blade unit (c1): the 3 folds of the gasket must be visible once it is in place. If it is positioned in the other direction, you will not be able to lock the blade unit on the jug. 25L for thick mixtures * 1L for liquid preparations. €¢ Lock the lid (c4) on the jug. Place the measuring cup (c5) in its recess on the lid. The blades are very sharp: handle them with caution to avoid injury. You can then collect the preparation in the bowl. * The colour of the bowl may change after blending certain very hard ingredients: (cloves, cinnamon, etc. ) 40 g 1 rusk 60 g 60 g 10 g 40 g Operating time 3 s / speed 2 In pulses 6 sec / speed 1 In pulses In pulses 30 sec / speed 2 Accessory D D D D D E CLEANING YOUR APPLIANCE • Unplug the appliance and remove the accessories • Handle them with caution: the blades on the blender jug and accessories are sharp. €¢ Remove the jug and rinse it and its lid under running water. €¢ To clean the motor unit (A), use a moist cloth. €¢ Never immerse the motor unit (A) in running water. €¢ For easy cleaning, be sure to wash the removable parts in water and a little washing-up liquid immediately after use. €¢ The jug (C) and accessories (D, E) can be cleaned in the dishwasher in the top basket with the “ECO” or “LIGHTLY SOILED” programme. €¢ To clean the blender jug (C) easily, unlock the blade unit (c1) by rotating it through a quarter turn in the anticlockwise direction. Remove the gasket (c2) and clean them under running water or in the dishwasher. [. . . ] The blender jug gasket (c2) is not positioned correctly or is missing. The gasket on the blade unit (d2) or (e2) is not positioned correctly or is missing. The gasket (c2) is not positioned correctly. contact an approved service centre (see list in service booklet). [. . . ]