User manual MOULINEX MO 1521

[. . . ] €¢ Do not hold the tool attachment or tube close to your eyes and ears. €¢ Do not use your vacuum cleaner on the wet surfaces, water or liquids of whatever kind, hot substances, extremely fine substances (plaster, cement, ash…), large sharp objects (broken glass), products that are harmful (solvents, paint strippers…), corrosive (acids, cleaning fluids…), flammable and explosive (petroleum or alcohol-based). €¢ Never immerse the appliance in water, do not spray water onto the appliance and do not store it outdoors. €¢ Do not use the appliance if it has fallen and has visible damage or appears to be working abnormally. [. . . ] - To replace it, do the reverse: replace the covers on either side of the handle by giving them a quarter turn in the direction of the arrow – fig. 5b, until they click, and then place the shoulder strap in its storage housing (7b). Be sure to observe the assembly direction ( ) indicated close to the on/off pedal (2). Always stop and unplug your vacuum cleaner before changing accessories. CONNECTING THE CORD AND STARTING THE APPLIANCE • Unwind the power cord completely, plug your vacuum cleaner in – fig. €¢ Set the suction power: - using the electronic power regulator* (3): turn the switch on the electronic regulator* to set the suction power: towards maximum position for floors and minimum position for furniture and fragile fabrics – fig. - with the mechanical power regulator on the grip: open the slider on the grip to manually reduce suction power, e. STORING AND TRANSPORTING THE APPLIANCE • After use, stop your vacuum cleaner by pressing the On/Off pedal (2) and unplug it – fig. Wind the power cord by pressing the cord winder pedal (4) – fig. €¢ Upright, place the tool attachment (22) in its housing under the appliance (1b) – fig. €¢ Horizontal, place the tool attachment (22) in its housing at the back of the appliance (1a) – fig. €¢ Open the lid (9) of your vacuum cleaner – fig. * According to model: these systems are specific to certain models or are accessories available as an option. €¢ Discard the microfilter * (13) into a dustbin – fig. 17c and replace it with a new microfilter (ref. €¢ Place the pins in the notches – fig. €¢ Lock the microfilter * behind the engine protection grid (12) – fig. €¢ Make sure the microfilter* (13) is properly in position before closing the lid (9). HEPA FILTER CASSETTE* (REF: MT0007 01) Important: Replace the HEPA filter cassette* MT0007 01 every 6 months (depending on the frequency of use). €¢ Open the lid (9) of your vacuum cleaner – fig. €¢ Throw the cassette into the dustbin – fig. €¢ Place the pins in the notches – fig. [. . . ] - HEPA cassette*: change the HEPA cassette * (14a) (ref. MT0007 01) and replace it in its housing or wash the HEPA filter cassette* (14b) (ref. * According to model: these systems are specific to certain models or are accessories available as an option. - Microfilter *: Remove the microfilter* and replace it with a new one (ref. [. . . ]