User manual MOULINEX MO 4543

[. . . ] €¢ Do not hold the tool attachment or tube close to your eyes and ears. €¢ Do not use your vacuum cleaner on the wet surfaces, water or liquids of whatever kind, hot substances, extremely fine substances (plaster, cement, ash…), large sharp objects (broken glass), products that are harmful (solvents, paint strippers…), corrosive (acids, cleaning fluids…), flammable and explosive (petroleum or alcohol-based). €¢ Never immerse the appliance in water, do not spray water onto the appliance and do not store it outdoors. €¢ Do not use the appliance if it has fallen and has visible damage or appears to be working abnormally. [. . . ] Be sure to observe the assembly direction ( ) indicated close to the on/off pedal (2). Always stop and unplug your vacuum cleaner before changing accessories. CONNECTING THE CORD AND STARTING THE APPLIANCE • Unwind the power cord completely, plug your vacuum cleaner in – fig. * According to model: these systems are specific to certain models or are accessories available as an option. 902185_Not Compacteo cyclonic:902185 20/05/09 8:51 Page 13 • Set the suction power: GB - using the electronic power regulator* (3): turn the switch on the electronic regulator* to set the suction power: towards maximum position for floors and minimum position for furniture and fragile fabrics – fig. - with the mechanical power regulator on the grip: open the slider on the grip to manually reduce suction power, e. STORING AND TRANSPORTING THE APPLIANCE • After use, stop your vacuum cleaner by pressing the On/Off pedal (2) and unplug it – fig. Wind the power cord by pressing the cord winder pedal (4) – fig. €¢ Upright, place the tool attachment (22) in its housing under the appliance (1b) – fig. €¢ Horizontal, place the tool attachment (22) in its housing at the back of the appliance (1a) – fig. €¢ Carry your vacuum cleaner easily thanks to its carry handles (6a or 6b) or its shoulder strap* (28). €¢ Unclip then remove the dust separator (15) in the unlocking direction ( ) - fig-23. €¢ Then run the dust compartment (13), dust separator holder (16) and the dust separator (15) under clear or soapy water - fig 24a. €¢ Once dry, replace then clip the dust separator (15) on the dust separator holder (16), in the locking direction ( ) - fig 25. €¢ Put them back on the dust compartment (13) - fig 26. * According to model: these systems are specific to certain models or are accessories available as an option. 902185_Not Compacteo cyclonic:902185 20/05/09 8:51 Page 14 • Place the accessory* (18b) into the lock slot of the dust separator holder (17) - fig 20. • Close it , respecting the locking direction ( ) - fig 27. €¢ Clip the HEPA filter capsule (14) (black foam filter (14a) + HEPA filter (14b)) in the compartment - fig 28a. €¢ Close the dust compartment (13) and replace it in its housing (7) - 28b. CLEANING THE HEPA FILTER (14B) ) The air we breathe contains particles that may be allergens: mite larvae and droppings, mould, pollen, smoke and animal residues (hair, skin, saliva, urine). The smallest particles penetrate deep into the respiratory system where they can cause inflammation and cause lung impairment. [. . . ] €¢ If the HEPA filter capsule (14) (black foam filter (14a) and HEPA filter (14b)) is damaged, throw it in the bin - fig. 32 and replace it with a new HEPA filter capsule (ref. €¢ Assemble the HEPA filter capsule (14): black foam filter (14a) and HEPA filter (14b) under the dust compartment (13) - fig. 28a then replace the compartment in its housing (7) - fig. [. . . ]