User manual MOULINEX MO 6527

[. . . ] €¢ Always keep nozzles and tube ends well away from eyes and ears. €¢ Do not vacuum wet surfaces, any water or any kind of liquids, hot substances, ultra-fine substances (plaster, cement, ash, etc. ) large sharp debris (glass), dangerous products (solvents, stripping compounds, etc. €¢ Do not immerse the appliance in water, project water on the appliance or store it outdoors. [. . . ] €¢ Set the suction power: - using the electronic power regulator (3): turn the switch on the electronic regulator to set the suction power: towards max position for floors and min position for furniture and fragile fabrics - fig. - with the mechanical power regulator on the grip: Open the manual suction regulator to reduce the suction power manually – for fragile surfaces, for example - fig. STORING AND TRANSPORTING THE APPLIANCE • After use, stop your appliance by pressing on the on/off pedal (2) and unplug it - fig. Replace the cable by pressing the automatic cable rewind pedal (4) - fig. €¢ In the horizontal position, hook the floor nozzle (22) onto its storage position at the rear of the appliance (1a) - fig. €¢ Upright, place the attachment (22) in its housing under the appliance (1b) - fig. €¢ Carry your vacuum cleaner easily thanks to its carry handle (6). Always stop and unplug your vacuum cleaner before maintenance or cleaning. EMPTY THE DUST BOX • • • • • • • • Empty the dust box (11) after each use. Remove the flexible tube (19) from the suction opening (8) - fig. Open the lid (7) of your vacuum cleaner. €¢ Turn the HEPA filter (18b) over and tap the dust into a dustbin - fig. €¢ then scrape the filter (inner face of the capsule) using the scraper * (28) under cold or warm water, then leave the HEPA filter to dry for 24 hours - fig. €¢ Once completely dry, assemble the cassette HEPA filter (18): black foam filter (18a) and HEPA filter (18b) under the dust box (11) and replace the box in its housing (9) - fig. €¢ Ensure that the HEPA filter is completely dry before you put it back in the appliance. Make sure that all the filtration system is properly positioned before turning your appliance back on. MT0006 01) • Remove the flexible tube (19) from the suction opening (8) - fig. €¢ Open the lid (7) of your vacuum cleaner. €¢ Remove the dust box (11) from its housing (9) - fig. HEPA FILTER CAPSULE (18) • Simultaneously press the HEPA filter capsule opening clips (15) - fig. €¢ Separate the black foam filter (18a) from the HEPA filter (18b) - fig. 19 and replace it with a new HEPA filter capsule (ref. [. . . ] €¢ The lid (7) of your vacuum cleaner is not closed properly. IF THE LID DOES NOT CLOSE • Ensure that the dust box (11) is properly mounted and present. €¢ Ensure that the dust box (11) is well properly positioned in the dust tray housing (9). IF THE FLOOR HEAD IS HARD TO MOVE AROUND • Open the mechanical power regulator on the grip or decrease power. [. . . ]