User manual MPMAN DAB120

[. . . ] In case the function could not resume, please use the product in other location. Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside, refer all servicing to qualified service personnel. DANGEROUS VOLTAGE Conductor dangerous voltage, that may be of sufficient magnitude to constitute a risk of electric shock to persons is present within this product's enclosure. ATTENTION The owner's manual contains important operating and maintenance instructions, for your safety, it is necessary to refer to the manual. [. . . ] In order for the clock to synchronise to the current local time you must leave it one DAB station for a short period. DAB auto tune modes There are two types of auto scan modes, one is local auto scan and the other is full auto scan. Local auto scan will only search for the UK DAB Band III channels and full auto scan will search for all DAB Band III channels. After the scan has finished, the first alphanumerically found station will be automatically selected. To activate the local auto scan, press the MENU button to enter into the Tune Select Menu and then press the or button to select "Local scan", then press the SELECT button to confirm, the display will show "Scanning . All the stations that have been found will be stored automatically, to explore the found stations, press the or buttons and then press the SELECT button when you find a station that you would like to listen to. To select manual tune, first press the MENU button to enter into the Tune Select Menu, then press the or buttons to select "Manual tune", finally press the SELECT button to confirm. Press the or buttons to move through the DAB channels, the display will show "5A to 13F" and their associated frequencies. DAB secondary services On some occasions you will see a ">" symbol directly after the name of the station, this indicates that there are secondary services available to that station. The secondary services are inserted directly after the primary station. DAB display modes Every time you press the DISPLAY/INFO button, the display will cycle through the following display modes: DLS DLS stands for Dynamic Label Segment which is a scrolling message that the broadcaster may include in their transmissions. Press the OPEN button to open the CD door, insert the disc with the printed label side facing up and then close the CD door. The display will first show "READING" and then the total number of tracks on the disc and time. Press the /button to start playback from the first track, the display will show the current track number and elapsed time. Selecting a different track during play 1. To select a different track during play, press the I or I buttons until the desired track number appears on the display, then release the button, playback will begin from this track. To play the next track, press the I button once. To play the previous track, press the I button twice. To play the current track from the beginning during play, press the I button once. Press the REPEAT button to select the repeat play, to repeat the same track, press the REPEAT button once, the display will show " 1 ". To repeat the entire disc, press the REPEAT button again, the display will show " 3. To cancel repeat play, repeatedly press the REPEAT button until the repeat icon disappears in the display. [. . . ] To activate the sleep function, repeatedly press the SLEEP button, the sleep time in the display will change in sequence on every press: When the display shows your desired sleep time, release the button, the sleep timer is now activated. The display will show "S#" in which "S1" is to indicate "10 minutes" sleep time and so on. 22) To cancel sleep function, press the SLEEP button once, the display will show "Sleep-Off" and the "S#" will be disappeared. To cancel mute and restore the sound, press the MUTE button again or the VOLUME +/button, the "MUTE" will disappear in the display. [. . . ]