User manual MPMAN TPM 300

[. . . ] Important information: please read and retain all the operating instructions before operating the unit, we do not assume any liability arising out of improper operation or incidental damages. Be note to operate this unit with care and back up any files if necessary. The content of this manual may be changed for better services. Specifications are subject to change and improvement without notice. [. . . ] If the time length of the file recorded is less than 1 hour, the time length will display as (m; s) at the right side of the sequence of song, if more than 1 hour, it will display as (h; m); while ":" will flash, like "01:34" displays below the song sequence, it indicates that the whole length of time is 1 hour 34minutes. Playback time indication of the DVR recording files The file recorded in the unit, whose time length is less than 1 hour, it normally displays the playback time as (m; s), when its time length is more than 1 hour, the playback time exceeds 1 hour while playing, the time length of current file display as (h; m), ":" will flash. Telephone conversation recording Connect the external telephone line and telephone cable to the telephone adaptor; link the audio line to the adaptor and LINE IN jack. Continuously press button to start recording. 9 LINE IN LINE IN cable Telephone line Telephone adapter 2. 11. Transfer recorded files to the external equipment Link the audio cable to the PHONES (earphone) and external equipments' in-put jack, and then press button of the recorder and the external equipment's REC button at the same time. (Please test the external equipment's REC function before your recording in order to avoid failed recording) Note: during the recording, if the unit was shut off by knock or other actions, all recording files will lose. So please operate carefully. 10 Teleph on e l in e 2. 12. Convert REC format files into WAV format The REC format files can be converted into WAV format through the software in the install CD accessorized with the unit. 1). Open and run "sound converter", click "open" 2). Select the REC files you want to convert 3). Clock "convert" and start the converting Besides, the software can also play WAV and Mp3 format files. If you press other buttons except PLAY and EQ or no operation was conducted within 5 seconds, the unit will give up delete and return to stop status. Delete all Under stop status, continuously press EQ to enter delete mode. Then the LCD display DELETE and ONE and the indicator will flash to be confirmed, shortly press EQ button again, LCD will display and flash ALL to wait the confirmation. Press the button again to delete current file. If you press other buttons except PLAY and EQ or no operation was conducted within 5 seconds, the unit will give up delete and return to stop status. Note: this unit can play MP3 (MPEG1, 2, 2. 5 layer 3) and WMA format files MP3 mode, DVR mode and remaining capacity checking mode Under stop status: shortly press MODE button, DVR mode will shift to MP3 mode and MP3 mode will shift to DVR Setting mode & remaining capacity checking mode. 14 4. REC Type Under the state of REC Type mode, press "+" or "-" to select (HQ/HP) or (LQ/LP), while using HQ/HP, files will have high and good quality, while using LQ/LP, it's in long time recording. 4. 1High quality (HQ) recording and low quality (LQ) recording operating The unit has two ways of recording: High quality and low quality. NOTE: Under REC Mode, icon "HQ/LQ" indicates the format of files recorded; under DVR mode, icon of "HQ/LQ" indicates the format of the current recording files. While files recorded via HQ/HP, format of files will be WAV, recorded via LQ/LP, files will be in REC format. Voice-controlling recording: ON/FF Under the state of voice-controlling recording, press "+" or "-" to select OFF or ON, OFF is to close voice-controlling recording, while ON is to open it. [. . . ] Therefore the file transfer is operated in the same way as the ordinary disk. Click "Removable Disk" with right button of the mouse, and choose "Format" from the menu, see the left picture: C. That the format window will pop out, please see the above picture: 23 D. Click "Start" in the format window. [. . . ]