User manual MPMAN XRM 7

[. . . ] The product must be installed in accordance with local laws. Damaged batteries must be properly disposed. In order to protect the environment, please dispose the batteries properly, in accordance with local laws (information is available at your reseller). Where to install the product Place the product on a straight, rigid and stable place. [. . . ] Press POWER button on the front panel to turn on. Press EJECT button on the front panel to open the disc door, put the disc into the CD compartment, and then close the disc door. POWER Press the POWER button on the remote control (or front panel) to turn on or back to standby mode NUMBER BUTTONS While playing songs, press the NUMBER buttons on the remote control to select the songs you need. For example, the second song is required: press the 0 and 2 buttons. If the 16 th song is need, press the 1 and 6 buttons. VOLUME ADJUSTMENT Press the VOL-/+ buttons on the remote control to turn up or down the volume of this unit. You can also turn the VOLUME KNOB on the front panel to control volume. PLAY/PAUSE In play status, press the PLAY/PAUSE button, the play will be paused, and press it again to continue playing. STOP While playing CD disc, press the STOP button on the remote control, and then press PLAY/PAUSE button, the disc will be played from the beginning. 7 MUTE In play status, If the MUTE button is pressed, there will be no audio output, the sound is eliminated. Then press this button again or press VOL+/- buttons to exit the mute status, the sound resumes to be its normal status. FAST REWIND / FAST FORWARD While playing the CD disc, press the button or button, the disc will play fast rewind or fast forward. Press the PLAY/PAUSE button to exit this status and resume to normal playing. SEEK-/+ While in radio mode, press the SEEK- button or SEEK+ button, the player will seek the frequency up or down. REPEAT Wile playing the CD discs, repeatedly press the REPEAT button to separately select the different contents for repetition: Track repeat, All repeat. PROGRAMMED PLAYBACK Up to 20 tracks can be programmed in to play in any desired sequence. In stop mode, press the PROG button the display shows"PO1" in the display 2. Press number key to input the desired track to be memorized. Press to the PROG twice, the display shows "PO2" the first program is OK. Note: when you operate this function , please make sure the mode is STOP. Otherwise you would just find the selections to set the play mode RANDOM While playing the CD disc, press the RANDOM button to play the disc in random. AUTO While in radio mode, press the AUTO button to search the bands automatically. PREVIOUS/NEXT While playing the CD disc, press or button to go to the previous or next song. CH- /CH+ While in radio mode, press CH- or CH+ button to go to the previous or next band. MONO/STEREO While in radio mode, press the MO/ST button on the remote control to select the mono or stereo. SAVE While in radio mode, press the SAVE button on the remote control to store the current band. [. . . ] If the signal is not strong enough, you cannot select Stereo. Exit FM Status Press the CD/FM button on the remote control (or front panel) to exit FM status, and press CD/USB switch to other modes. Remark: FM Frequency range: 87. 5-108 MHz NOTE: 1. You may adjust the best radio effect by adjusting the antenna. [. . . ]