User manual MR COFFEE CNX20

[. . . ] Turn the coffeemaker OFF and unplug the power cord from the power source when the coffeemaker and clock are not in use and before cleaning. Allow the coffeemaker parts to cool before putting on or taking off parts and before cleaning the appliance. Do not operate any appliance with a damaged power cord or power plug, or operate it after the appliance malfunctions, or has been damaged in any manner. Return this appliance only to the nearest Authorized Service Center for examination, repair or adjustment. [. . . ] This is a vital step in making espresso and takes practice. The correct grind should look like salt. If the grind is too fine, the water will not flow through the coffee even under pressure. If the grind is too coarse, the water flows through the coffee too fast, preventing a full-flavored extraction. Be sure to use a quality grinder for uniform consistency in your espresso grind. Do not fill to the top of the reservoir or there will not be enough area to generate steam. CauTIOn: Do not pour water into the tank while the appliance is on or if the tank is hot. Check to make sure the power switch is in the Off position. Screw the cap back on top of the water reservoir. Place the cover on the carafe so the lid opening faces the spout, and set it on the drip tray. Make sure the brew basket spout is nestled inside the center opening of the carafe lid. After frothing is completed, turn the control knob back to the Closed position before removing the pitcher from the frothing aid and turning the power switch Off. NOTe: After turning knob to Off, there still may be some espresso coming out. reMeMBer: It is 1/3 espresso , 1/3 steamed milk and 1/3 frothed milk. Pour the espresso into a cup which has the capacity of at least 5 ounces. Then add the steamed milk to the espresso and spoon on the frothed milk. Follow the instructions on Page 3 under section marked "CAUTION: PRESSURE" to flush out any residual milk from the frothing aid. (Milk can clog the frother and prevent it from working in the future. ) When finished using and cleaning the frother, swing it back into the unit. Ensure power is off and unplug the power cord and allow the machine to cool. Do not remove the reservoir cap or brew basket until the pressure in the machine has been released. CAUTION: Do not remove reservoir cap or brew basket at any time while the CAUTION: The metal parts of the brew basket might still be very hot. [. . . ] If the product is no longer available, replacement may be made with a similar product of equal or greater value. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. JCS dealers, service centers, or retail stores selling JCS products do not have the right to alter, modify or any way change the terms and conditions of this warranty. [. . . ]