User manual MSI G52-M7037X3

[. . . ] 865GM3/865GVM2/865PEM3/848PM MS-7037 (v1. X) M-ATX Mainboard G52-M7037X3 i Manual Rev: 1. 2 Release Date: July 2004 FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. [. . . ] Then you may use the arrow keys ( - ) to select the desired device, then press <+>, <-> or <PageUp>, <PageDown> key to move it up/down in this hard disk boot priority list. CD-ROM Boot Priority Press <Enter> to enter the sub-menu. Then you may use the arrow keys ( - ) to select the desired device, then press <+>, <-> or <PageUp>, <PageDown> key to move it up/down in this CD-ROM boot priority list. BIOS Virus Warning The item is to set the Virus Warning feature for IDE Hard Disk boot sector protection. If the function is enabled and any attempt to write data into this area is made, BIOS will display a warning message on screen and beep. Hyper-Threading Technology The processor uses Hyper-Threading technology to increase transaction rates and reduces end-user response times. The technology treats the two cores inside the processor as two logical processors that can execute instructions simultaneously. In this way, the system performance is highly improved. If you disable the function, the processor will use only one core to execute the instructions. Settings: [Disabled] and [Enabled]. 3-7 MS-7037 M-ATX Mainboard MSI Reminds You. . . Enabling the functionality of Hyper-Threading Technology for your computer system requires ALL of the following platform Components: * CPU: An Intel ® Pentium® 4 Processor with HT Technology; * Chipset: An Intel ® Chipset that supports HT Technology; * BIOS: A BIOS that supports HT Technology and has it enabled; * OS: An operating system that supports HT Technology. For more information on Hyper-threading Technology, go to: www. intel. com/info/hyperthreading Quick Boot Setting the item to [Enabled] allows the system to boot within 5 seconds since it will skip some check items. Available options: [Enabled], [Disabled]. Full Screen LOGO Show This item enables you to show the company logo on the bootup screen. Settings are: [Enabled] Shows a still image (logo) on the full screen at boot. [Disabled] Shows the POST messages at boot. 1st/2nd/3rd Boot Device The items allow you to set the sequence of boot devices where BIOS attempts to load the disk operating system. Available settings for "1st/2nd/3rd Boot Device" vary depending on the bootable devices you have installed. For example, if you did not install a floppy drive, the setting "Floppy" does not show up. Boot Other Device Setting the option to [Enabled] allows the system to try to boot from other device if the system fails to boot from the 1st/2nd/3rd boot device. Swap Floppy Setting to [Enabled] will swap floppy drives A: and B:. Floppy Seek Setting to [Enabled] will make BIOS seek floppy drive A: before booting the system. [. . . ] Hence, the program screens shown here in this appendix may be slightly different from the latest software utility and shall be held for reference only. A-2 Using 2-, 4- & 6-Channel Audio Function 3. Click Next to install the AC'97 Audio software. Click here 4. Click Finish to restart the system. Select this option Click here A-3 MS-7037 M-ATX Mainboard Software Configuration After installing the audio driver, you are able to use the 4-/6-channel audio feature now. Click the audio icon from the window tray at the lower-right corner of the screen to activate the AC97 Audio Configuration. Sound Effect Here you can select a sound effect you like from the Environment list. You may also edit the properties for an environment as you wish by clicking the Edit button, then just scroll the bar in the bottom for each property to adjust. A-4 Using 2-, 4- & 6-Channel Audio Function Here it provides the Karaoke function which will automatically remove human voice (lyrics) and leave melody for you to sing the song. [. . . ]