Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MSI PM8-M-V. We hope that this MSI PM8-M-V user guide will be useful to you.
Lastmanuals help download the user guide MSI PM8-M-V.
Detailed instructions for use are in the User's Guide.
[. . . ] All trademarks are the properties of their respective owners. NVIDIA, the NVIDIA logo, DualNet, and nForce are registered trademarks or trademarks of NVIDIA Corporation in the United States and/or other countries. 0 Revision History First release of V-Series with VIA P4M800/VT8237R chipsets Date January 2005 Always read the safety instructions carefully. Keep this User Manual for future reference. [. . . ] Press the two levers down to fasten the fan. Each lever can be pressed down in only ONE direction. Connect the fan power cable from the mounted fan to the 3-pin fan power connector on the board. Confirm if your CPU cooler is firmly installed before turning on your system. Each DIMM slot supports up to a maximum size of 1GB. You can install either single- or double-sided modules to meet your own needs. The DDR DIMM has only one notch on the center of module. Insert the DIMM memory module vertically into the DIMM slot. Then push it in until the golden finger on the memory module is deeply inserted in the socket. For the updated supporting memory modules, please visit our Web site at http://www. The mainboard supports ATX power supply for the power system. Before inserting the power supply connector, always make sure that all components are installed properly to ensure that no damage will be caused. Power supplies of 300watt (and up) are highly recommended for system stability. This connector allows you to connect to an ATX power supply. To connect to the ATX power supply, make sure the plug of the power supply is inserted in the proper orientation and the pins are aligned. Then push down the power supply firmly into the connector. This 12V power connector is used to provide power to the CPU. You can connect up to four hard disk drives, CD-ROM, 120MB Floppy and other devices. The first hard drive should always be connected to IDE1. iDE1 can connect a Master and a Slave drive. You must configure second hard drive to Slave mode by setting the jumper accordingly. If you install two hard disks on cable, you must configure the second drive to Slave mode by setting its jumper. [. . . ] The items in this submenu includes some important settings of CPU, AGP, DRAM and overclocking functions. Change these settings only if you are familiar with the chipset. Current FSB Frequency It shows the current clock frequency of the front side bus. (read only) Adjust CPU Ratio This setting controls the multiplier that is used to determine the internal clock speed of the processor relative to the external or motherboard clock speed. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MSI PM8-M-V
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MSI PM8-M-V will begin.
