User manual MTD SC2400

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MTD SC2400. We hope that this MTD SC2400 user guide will be useful to you.

Lastmanuals help download the user guide MTD SC2400.


Mode d'emploi MTD SC2400
Download

You may also download the following manuals related to this product:

   MTD SC2400 PARTS MANUAL (35537 ko)

Manual abstract: user guide MTD SC2400

Detailed instructions for use are in the User's Guide.

[. . . ] INTRODUCTION Welcome to the World of Cub Cadet Yanmar Tractor Thank you for purchasing our tractor product that has been designed and manufactured based on our state-of-the-art technology and rich expertise in developing and manufacturing tractor products. Handle your tractor correctly by following the instructions contained in this Operator’s Manual so that it provides you long years of reliable and faithful service. This manual constitutes an indispensable part of your Cub Cadet Yanmar tractor product. Always keep the manual readily accessible. [. . . ] ● Make sure that all shields and guards are in position and are correctly used. ● Do not run the engine at 3520 min-1(rpm) or more while the Power Take Off (PTO) is engaged. 9-1 Sc2400 Operator’s Manual 9. POWER TAKE OFF (PTO) ■ Rear Power Take Off (PTO) (A) Rear Power Take Off (PTO) shaft (A) P3014908 ■ Mid-Power Take Off (PTO) (A) Mid-Power Take Off (PTO) shaft 3014919d (A) ■ Engage the Power Take Off (PTO) NOTE ●This tractor cannot drive the Power Take Off (PTO) unless the operator sits on the seat. When the operator leaves the seat while the Power Take Off (PTO) is engaged, the safety interlock system stops the implement and the engine. ●Normally, reversing the tractor stops the MidPower Take Off (PTO) and the Rear Power Take Off (PTO). To drive the Power Take Off (PTO) while reversing the tractor, use the reverseoverride-switch. (A) Reverse-override-switch 3014919d (A) Sc2400 Operator’s Manual 9-2 9. Engage the parking brake securely. (A) Parking brake lever (A) 3014916d 3. Push in the Power Take Off (PTO) switch to set it to the OFF position. (A) Power Take Off (PTO) switch (a) OFF position (b) ON position (A) 4. Adjust the engine speed to 1500 min-1(rpm) or lower. IMPORTANT ●In order to reduce any shock at the time of driving the Power Take Off (PTO), make sure to reduce the engine speed before turning ON the Power Take Off (PTO) switch. 3014926 3014919g (a) (b) 6. According to an implement to be used, operate the Mid-/Rear Power Take Off (PTO) select lever. (A) Mid-/Rear Power Take Off (PTO) select lever (a) Operating the Mid-Power Take Off (PTO) alone (b) Operating the Mid-Power Take Off (PTO) and the Rear Power Take Off (PTO) at the same time (c) Operating the Rear Power Take Off (PTO) alone (c) (b) (A) (a) 3014919e 7. Pull up the Power Take Off (PTO) switch to set it to the ON position. 9-3 Sc2400 Operator’s Manual 9. While watching the instrument panel, adjust the engine speed suitable for operating with the throttle control lever. (A) Throttle control lever NOTE ●When the engine speed is 3300 min-1(rpm), the Mid-Power Take Off (PTO) rotates at approximately 2100 min-1(rpm). ●When the engine speed is 3100 min-1(rpm), the Rear Power Take Off (PTO) rotates at approximately 540 min-1(rpm). (A) 3014903e ■ Disengage the Power Take Off (PTO) 1. Push in the Power Take Off (PTO) switch to set it to the OFF position. (A) Power Take Off (PTO) switch (a) ON position (b) OFF position (a) (b) (A) 3014919c Sc2400 Operator’s Manual 9-4 9. Install an Implement to the Power Take Off (PTO) Drivelines IMPORTANT: Avoid damage. ●Observe the driveline manufacturer's installation instructions for driveline mounting angle and the length of overlaps on the two-part driveline shafts. An incorrectly installed implement can promote wear of the driveline and/or damage the tractor. 3. Operate the Power Take Off (PTO) while the Tractor is Traveling in the Reverse Direction (Reverse Override Function) !WARNING ●Use EXTREME caution to check that anyone or any object is not present in the rear area when using the Power Take Off (PTO) in reverse. Normally, reversing the tractor stops the Mid-Power Take Off (PTO) and the Rear Power Take Off (PTO). To drive the Power Take Off (PTO) while reversing the tractor, observe the following instructions: 1. [. . . ] 5-2 ● Cruise Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7 ● Differential Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13 ● Drawbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 ● Drive Pedal (Forward/Reverse) . . . . . . . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MTD SC2400

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MTD SC2400 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag