User manual MTD 3000C

[. . . ] Operator’s Manual High Pressure Washer Model 3000C IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY CUB CADET P. O. BOX 368023 CLEVELAND, OHIO 44136-9722 [www. cubcadet. com] FORM NO. 770-10451 (9/00) CONTENTS Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safe Operation Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Using the Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Working with Detergents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Shut Down and Clean-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Taking a Break . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Winterizing and Long-Term Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Cleaning Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Optional Cleaning Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2 MODEL 2500C OVERVIEW Specifications Engine Water volume Operating pressure Item Description 1. Water inlet Detergent tray w/ screw Knob Assembly (six) Oil fill cap (not seen) High pressure hose Detergent suction tube w/filter Handle Hose Reel Ass’y. [. . . ] The special formulas will not clog the suction tube filter and will protect the internal parts of the pressure washer for a longer life. For Cub Cadet Detergents, check your local Cub Cadet dealer. If you need help locating a dealer in your area, contact the Customer Dealer Referral Line by calling: 1-877-835-7841 Step5 With the engine running, pull trigger to operate unit: Liquid detergent is drawn into the unit and mixed with water. Do not allow detergent to dry on surface. One gallon container of the following Cub Cadet detergents are available: • Vehicle Wash Part No. KR-9103504 Cleaner Caution Never use: • Bleach, Chlorine products and other corrosive chemicals • Liquids containing solvents (i. e. , paint thinners, gasoline, oils) • Tri-sodium phosphate products • Ammonia products • Acid-based products These chemicals will harm the unit and will damage the surface being cleaned. 10 SHUTTING DOWN & CLEAN-UP Step2 Step1 Remove detergent suction tube from container and insert into one gallon of fresh water. Siphon water at low pressure for one minute. Move the trottle control lever to the “SLOW” position Step3 Turn the and allow engine to engine fuel shut-off Step4 Turn off the idle 30-60 seconds. valve to the “OFF” water source. Turn the engine on/ position off switch to the “OFF” position. Step5 Press trig- Step6 Disconnect Step7 Disconnect Step8 Engage the ger to release water the high pressure the garden hose gun safety lock. hose from the high from the water inlet pressure. five minutes or more Step1 Move the trottle control lever to Step3 Press trigthe “SLOW” position the ger to release water Step4 Engage the and allow engine to Step2 Turn gun safety lock. For removing extremely stubborn stains, use the Cub Cadet Rotating Nozzle Spray Wand. Cars, Boats & Motorcycles (with or without detergent) Pre-rinse vehicle with fresh water. If using Cub Cadet Vehicle Wash, place detergent suction tube directly into cleaning solution and apply to surface at low pressure. For best results, clean one side of vehicle at a time and always apply detergent from bottom to top, do not allow detergent to dry on surface. Rinse at high pressure in a sweeping motion keeping the spray nozzle approximately 8 inches from the cleaning surface (distance should increase when rinsing pin-striping or other sensitive surfaces). Always clean from top to bottom and from left to right. For best results, wipe surface dry with a chamois or soft dry cloth. Caution: Do not use rotating nozzle spray wand on vehicles as it may cause damage. House Siding (with or without detergent) Pre-rinse cleaning surface with fresh water. If using Cub Cadet All Purpose Cleaner, place detergent suction tube directly into cleaning solution and apply to surface at low pressure (for best results, limit your work area to sections of approximately 6 feet and always apply detergent from bottom to top). Allow Cub Cadet All Purpose Cleaner to remain on surface 1-3 minutes. Do not allow detergent to dry on surface, if surface appears to be drying, simply wet down surface with fresh water. Rinse at high pressure from top to bottom in an even sweeping motion keeping the spray nozzle approximately 6 inches from the cleaning surface. Caution: Do not use rotating nozzle spray wand on siding as it may cause damage. 12 CLEANING TIPS - continued Barbecue Grills, Outdoor Power Equipment & Gardening Tools (with or without detergent) Pre-rinse cleaning surface with fresh water. [. . . ] Turn off machine and purge pump by squeezing trigger gun until a steady flow of water emerges through the nozzle. Thermal protection device will automatically reset. Contact your local Cub Cadet dealer. Water leaks from pump (up to 10 drops per minute is permissible). Thermal protection device has been activated. [. . . ]