User manual MTD 34073 PARTS LIST

[. . . ] Use the CH+ or CH- keys to select the channel from which you wish to record. Use SP for 2 hours, SP+ for 2, 5 hours*, LP for 3 hours, EP for 4 hours or EP+ for 6 hours* of recording; the HQ mode is optimised for digital camcorders. Press RECORD or REC/OTR to start recording. [. . . ] Normally SCART (2) is the best connection. l If your TV has EasyLink, connect the SCART first, before connecting the power. Connect the DVD Recorder to the TV’s EasyLink connector. Check your TV manual for the appropiate SCART input. TV 4 5 2 Important: Recordings on a DVD+RW disc are normally started from the position where the last recording was stopped. From there on earlier recordings may be overwritten without notice. l To prevent overwriting, hold the RECORD key pressed until ‘SAFE RECORD’ appears on the display. AUX- I/0 EXT 2 EXT 4 EXT 3 TO TV I/0 EXT 1 Recording from a camcorder or video recorder 1 2 Press MONITOR/TUNER to view the channel or input that is currently selected. Use the CH+ or CH- keys to select the front input (CAM1, CAM2 or CAM3 (34073 only)) or rear input (EXT1, EXT2, EXT3 or EXT4) from which you want to record. Press SELECT to choose the record mode (HQ, SP, SP+*, LP, EP or EP+*). Press RECORD or REC/OTR to start recording. l To stop playback at any time, press 9 STOP or DISC MENU. Playing a DVD+RW/+R disc l If the inserted disc is write-protected, playback always starts automatically. l When you press 2 PLAY, playback starts automatically from the point where it was stopped the last time the disc was played or recorded. If you want to start playback from the beginning of the disc, you can do so via the Index Picture Screen. l To stop playback at any time, press 9 STOP or DISC MENU. Timer programming without the VIDEO Plus+ system 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Press TIMER on the remote control. Select ‘Timer programming’ with v (up cursor) or w (down cursor). Enter the date with v (up cursor) or w (down cursor), or with the digit keys 0-9. Enter the programme number from which you want to record. If you made a mistake, you can go back with t (left cursor). ‰ The data has been stored in a timer block. [. . . ] ‰ The data has been stored in a timer block. Switch off with B STANDBY/ON, otherwise the timer recording cannot start. Handy shortcuts On the Index Picture Screen l To move to the last title, hold K NEXT pressed. l To move to the first title, hold J PREVIOUS pressed. [. . . ]